Search results

I have been using my new powder dump for about 4 months or so and still have a problem with static. I keep a fresh fabric cloth in it and it helps some what but does not eliminate all the static. My charges are accurate but when I go to empty the dump powder sticks to the sides of the hopper...

I am not getting great accuracy with these bullets in 38 cal. When shooting in my model 19 with 4" barrel. I am using bullseye powder with from 2.7 to 3.5 gr. I might have had too much crimp. What is you guys opinion ? I get excellent accuracy with 2.7 gr bullseye with 148 lhbwc's What would I...

is anyone shooting these bullets ? How do you like them ...

Is there any way to tell if the once fired processed 5.56 brass is really once fired ? I bought 250 5.56 cases that he said are once fired and processed with the crimp removed, trimmed and ready to load. I loaded 25 of them with a 55 gr bullet and 24.0 gr of H335 powder which is not a hot load...

I have a smith and Wesson model 19, what do I need to slug the barrel to find what size bullet will fit my barrel the best ?

Is any of you guys using one of these prep centers ? Is anyone using any other brand of prep center that you feel might be a better unit ? http://www.midwayusa.com/product/628405/frankford-arsenal-platinum-series-case-prep-and-trim-center#pr-header-back-to-top-link

I have a S&W model 19 4" barrel. I have only shot light loads in this revolver since it is a light frame and have read about forcing cone problems with full mag loads. I would like to buy a heavier frame 357 mag with a 6" barrel for shooting full 357 magnum loads. What would you guys recommend ?

Does anyone know where to get some once fired 300 savage brass ?

Loading 158 gr lswc in 38 spl with 3.0 of bullseye, how much crimp should be used if any ?

when you shoot 38's in your 357 magnum what do you use or how do you clean the carbon rings out ?

can these bullets be loaded to magazine length for an AR ?

Has anyone loaded the Hornady 53 gr match hollow point flat base bullet ? How well did they shoot ?

Has anyone tried the JP yellow springs in their AR ?

Is there a list or a sticky on which 223 5.56 brass is good or bad for reloading ?

Back in the mid to late 70's I bought a rifle in 30-06 cal. It was a sporterized rifle with nice wood stock. Does anyone know if it would have been an A1 orA3 ? Also it had a recoil reducer or buffer in the stock, what would that have been ? It was a sweet shooting and very accurate rifle. I...

Has anyone ever heard of this brand ? Are the cases any good for reloading ? It is brass cases

I use an RCBS sizing decapping die for 223. The problem is that the old primer is not always completely removed. M4eaning I have to work the handle a second time to get the primer all the way out. I have lengthening the pin and shortened the pin but that didn't help. Has anyone else had this...

I am thinking about a Rock River varmint trigger for my AR. Does anyone have any experience with them ?

when you guys work up a load for accuracy in 223 AR's, what range do you shoot at 50, 100 or 200 yds ?

How do you guys sort your 223 s 5.56 brass ? Do,you sort and keep track of how many times fired ?