Search results

Handloader here. Was looking to get a 357 sig barrel for my G22 (already have stock barrel & 9mm Storm Lake barrel). But I saw a G32 in the case which fit my hand nicely - a lot nicer than a G26/27 does - and I don’t have a subcompact Glock (19, 23, etc) so a new frame size would get added to...

I may have messed up here. Due to some misfeeds and jamming and not 100% consistency, I figured it was time to upgrade to a Colt which I had heard a lot about. I traded in my Panther (St Cloud, not Huntsville - I’ve heard these are collectible now?) and slapped down another $600 to pick up a...

I use a different powder for each bullet weight in a specific caliber. For instance, my pet loads in in 9mm consist of : Clay Dot in 115gn, Red Dot in 124gn, and TiteWad in 147gn. Or for 45 it’s Clay Dot in 185, AutoComp in 200, and Universal in 230. Some non-conventional powders, I’m aware...

I recently got into reloading 308. I bought a bunch of discounted brass from a secret source (shhhh) - various brands, mostly LC, some Winchester, some PMC, Lapua, etc etc. and I bought four pounds of various known 308 powders. I also purchased a Lyman 3-die set (quick Neck Sizer as well as...

Haven't taken this rifle to the range yet, but it seems to have gritty action when pulling back the charging handle even after lubricating the whole bolt carrier and rod extensively. Other ARs I've handled don't seem to exhibit this problem. Any reason why? It's never been shot. It's also...

Proud new owner here. I usually stick with my pet load of 4.2 gn of W231 w/ 180gn bullets. Anything special that this sweetie likes? I'm excited to take it out.

How can I keep this from happening? When I load my frangible bullets it doesn't happen but I have a 50% "seat too far" rate with my SS 63gr Steel Penetrators. It just falls back into the case. I resize while I'm depriming and do not flare my cases. I have carpal tunnel and constantly pulling...

I decided to purchase a pound for cheap and researched that it is similar to unique. I did some shooting today and while I will take no responsibility for injury or misuse, I will say this : In 9mm and 40 this is a solid powder. Loads tested included a 115 gn bullet on top of 4.7 grains...

I have a smith and wesson 640 no-lock rated for 38+p. I've been loading 4.8 grains of Longshot under a 125 grain FP (xtreme bullets). The problem is, I'm consistently getting bullets stuck in the barrel. It's about every 3 rounds. This last time the bullet barely cleared the chamber and the...

I haven't picked a bullet weight yet but I'm thinking 55 gn, in the middle practically. I want accuracy through a DPMS AR15, but also lighter recoil. I'll be using CCI Small Rifle Primers. I made a list and Here's what my LGS has in stock : IMR 8208 XBR VARGET BENCHMARK H-380 H414 H4198 BLC2...

The first die set I bought a few years ago was a Lyman Carbide 9mm Luger set. It performed flawlessly but I knew there were cheaper options out there and more elegant ones to boot. My next die set was a Lee red box set, with powder dipper, shell holder, and all. Excellent value at $30, or so I...

I can buy 125 gn plated bullets significantly cheaper than 158 gn, and I like the cost savings. I have a 640 on layaway right now so I'm not sure what it likes. It's a 2 1/4" snubbie, DAO, 38 special, stainless steel. Anyone with a J-Frame care to comment on the accuracy and recoil of 125 gn...

I don't reload shotgun, just pistol and rifle, but this shortage has opened my options and thus I have found a new favorite. I have tried this powder in 9mm, 380, and 40. It's the softest recoiling, cleanest burning, most accurate, and most economical powder I own. At $17.99/lb and roughly 3.5...

Just brought home an LE trade in G22, now I need to find some bullets to reload with. I'm looking for mild recoil and accuracy. I don't care so much about chrono, but I'd also like something fairly economical too. I shoot plated lead bullets only, usually through online distributors. There's a...

So the other night I was done with the powder in my hopper. I had win231 in there and went to dump the rest of the powder back into the jar. Well, I saw "winchester" but foolishly wasn't paying attention so I ended up mixing about 1/2 cup of 231 into my Auto Comp. They use similar charge...

I load 9mm and a few other handgun loads, namely 380 ACP. In my 380 I really have spent time working down the loads as even standard loads in a pocket pistol hurt the hand. I've gotten down to about 3.2 grains of Auto Comp or 2.2 grains of Titegroup, real pleasant to shoot. Now, listed load data...

Once fired, twice fired, 30x fired, I don't really mind. I'm looking for 30-06 brass or nickel casings, cheapest I can find that still hold integrity and aren't split or anything. So far the cheapest I've found is kensbrass, $7.60/20. Anyone got anything cheaper? Or care to sell me some? :D

I just reserved a used 640 in 38 sp +P and while I'm not a huge fan of shooting 357 recreationally I can't help but realize this doesn't take them. As far as I know, 357 is simply more powerful because it can hold a larger powder charge correct? So can a person load a 38 to match maybe a...

I just wanted to give a thumbs up to these guys. I ordered a couple sample packs and had the bullets in my hands within three days. Fast turnaround time, and their bullet coatings are top notch. I've ordered from other companies that took forever and weren't that great. Ill be using sns in the...

I don't reload shotgun but at the start of the shortage I bought a lb of blue dot for pistol as it was all I could find. I had used it for 9mm but found I had to load it heavy for good results. I have about 1/4 lb left. I'm planning to start loading 45 acp, would that be a better choice for blue...