Search results

These are advertised as standard lead handgun bullets with a plastic coating. They claim it eliminates the need for lubrication and so leaves a cleaner bore in the pistol. I saw these listed online by King Shooter Supply in Pa. I would like to hear from guys who have used these bullets and...

I have a CZ 27 in .32 ACP. I want to move the rear sight to correct the point of impact but it will not move. I have been tapping on it quite hard with brass rods but it remains frozen in place. I have thought about using Kroil in the dovetail to loosen things up. I really don't know if...

Is there some gadget that can do this? It's getting difficult for me to do this accurately with a metal punch and hammer.

At the range recently I had been firing .32 ACP handloads in this pistol when a live round became stuck in the barrel. I took the pistol to my gunsmith today and he removed the live round. This particular round had a bulge in the case so that it never fully seated in the chamber. Since the...

Here is the situation. I use the press for batch reloading. I have been doing this with this press for many years without any problems. Today I was depriming, resizing and seating new primers for .38 special. I do not use the Lee Safety Primer Feed. I just place one primer at a time in...

I went to the range today to try out this pistol that I had bought recently. I was firing hand loads and everything was fine for the first 30 rounds. Then a round became stuck in the breech end of the barrel and I don't know how to remove it. It is stuck tight and will neither move forward...

Can someone tell me how to do this? I already have the spring from Wolff. TIA

My very old steel vice has 4" jaws. I would like to get some sort of plastic pads for holding pistols barrels and other gun related stuff. Is there any advantage to those with magnets as opposed to those that are held on with carpet tape? I would like some specific recommendations. TIA

I have been using this measure for a long time without any problems. Now I do have a problem. On 2 occasions during the last month the hopper became loose from the main assembly while I was charging cases. Powder spilled all over the bench and floor and it was a mess cleaning it up. Looking...

I have been using this measure successfully for many years. But in the last month there were 2 occasions where the hopper became loose while I was charging cases. Gunpowder spilled all over the bench and floor and was a mess to clean up. The hopper just looks like it is pressed into place in...

On average, I shoot mine about every 2 weeks. I was just curious about what other guys do.

Last month I bought my first pistol from GunBroker. It was a Beretta Puma in .32 ACP and was in 98% condition. It was made in Italy and resembled the Model 1935. It came with the original box and instruction paper. The seller claimed that the gun had been in his possession for over 20 years...

I would like to load this using the 71 grain FMJ bullets that I have. However, the only loads I can find are for 60 grain Speer bullets. Does anyone have data for loading Power Pistol with 71 grain bullets and also know what the FPS speed might be? TIA

I recently acquired an all steel pistol in 98% condition with original box and instructions. The box says, .32 caliber Puma Beretta. I took it apart and cleaned and oiled it without any trouble. It is a hefty piece and I like the feel and weight of it in my hand. I haven't fired it yet but...

Hi guys, I'm thinking of getting one of these in .32 auto. I would like to hear opinions on this pistol from people who have experience with them. TIA

Aim Surplus has had these .32 autos on sale for $199 and I bought one. The ad described them as police pistols. The pistol that I received was in very good condition. The steel slide had no wear marks at all and the aluminum frame had just a few. Mechanically the pistol was in perfect...

I hope someone can help me with this. I do batch loading with my Lee Classic Turret Press and have loaded many thousands of cartridges with it. This evening I encountered a problem I have never had before. I was sizing and priming a batch of .32 ACP cases. I size the case on the downstroke...

I would like to hear some opinions on this pistol. I have a chance to buy one at a good price. TIA

I have seen Russian steel cased 9mm ammo for sale at quite low prices. Is this okay to use in my EAA Witness Match? This pistol is a joy to shoot and I wouldn't want to damage it in any way. TIA

Does the CZ 70 magazine have a similar base plate to that of the CZ 27 with the little slot in the base plate which holds the end of the spring?