Search results

I just traded my Ruger 6.5. Then bought a Winchester XPR Sporter in 6.5 Creedmoor. And Ordered a Remington 700 5R Gen 2 in 6.5 Creedmoor..... With a Vortex Strike Eagle 3-18 with the EBR 4 MOA Reticle. I guess it's easier to ask Forgiveness than permission

What's the word on these rifles? I know there are in the same price range as the M&P 15 Sport. How are they built? Quality Barrel? I am considering taking one of these in on a trade...

So My Winchester XPR in 300 win mag is a real nice rifle for the money. Problem I seem to be having is that none of my handloads seem to shoot as well as Factory ammunition. I have good ES and SD numbers. And have seated bullets from .030-.075 off of the lands. The Factory ammo I have is .130...

Picked up some Speer 120 grain Hot Cor for my 6.5 Creedmoor. A steal at $5 a box. Anyone here ever use them for deer hunting? 120 too light? Probably be firing them around 2900 fps

Never done much with these bullets before. But I just picked up 2 boxes of the 129 grain 6.5 mm fot $5 a box! I am probably gonna load them with some H4350, RL 17 or IMR 4451. I figure I should be able to get them between 2850 and 2900. Even at full price these are cheaper than the Sierra...

So since I found out that I do not have a tear in my rotator cuff. I decided to keep the 300 win mag and start load development for the 200 grain ELDX. I did my ladder test as usual, but loaded an extra round at the top 2 charges and fired them into a dirt pile I made. I kept my Magnetospeed...

https://www.ammoland.com/2019/03/firearms-registration-act-introduced-in-pennsylvania/?utm_campaign=shareaholic&utm_medium=facebook&utm_source=socialnetwork&fbclid=IwAR0ijO67JX67tzCgoy4R8FMUt9x5ewXeqx7YjNeT96G_88D04f1X8hBAA3Q#axzz5i1lFtzg1

Well recently hurt my shoulder. Doc seems to think it's a Rotator Cuff injury. AndDoc also recommended against any rifle that recoils on the heavier side. She also told me that it could take months or even years to fully recover from it. Well today, being the guy who doesn't listen. Decided the...

Well awhile back I Hung a 4 inch steel plate at 300 yards. Just recently I settles on a final load for my 270 wsm. So Today I adjusted my scope the required amount of elevation and took a shot. WHACK!! Hit dead nuts in the center. I decided to take a second shot to make sure it wasn't luck...

Shot 2 ladder tests today with the new Winchester XPR Sporter in 300 Winchester Magnum. Both tests were using Reloder 26, CCI 250, Remington Once fired and neck sized cases. Bullets were 180 grain Sierra SBT, loaded .075 from the lands (Maglength) 165 Grain Sierra HPBT Gameking. Loaded .020...

So, I picked up some IMR 4451 End, and some RL 17 for my 6.5 creedmoor. I also picked up some more H-4350 as well as 130 grain gamechangers, and 143 grain ELDX bullets. Now I want to load up a couple ladder tests tonight, but cant decide what to use. The RL 17 will probably yield best...

I just bought 3 pounds of H4350, 2 pounds of IMR 4451, 5 pounds of RL25, 2,000 Winchester LR primers and a Lyman Turbo 2200 vibratory cleaner for $237.

I Traded my used savage 110 Tactical desert today for a NIB Ruger American Go Wild in the same caliber. The Savage was great. Shot well etc. I decided though that I wanted something lighter.. Something that wasn't as difficult to carry if I choose to hunt with it. Also one reason is that I...

I remember recently Reading somewhere on this forum that someone was looking for a Whitworth Interarms mark x in 375 H&H........ Who was it? I came across one today at a local shop. Date stamp is 10/86. Looks to be in pretty good shape.

Searching for a new recoil pad to replace the hard butt plate on my Interarms mark x 7mm Remington Mag. Does anyone here have advice on a pad that fits reasonably well? Mine has the hardwood Monte Carlo Stock. Thanks

I have always used the OCW method of load development. In fact I had not even heard of the Satterlee load development until recently. Today I decided to try it. I loaded a ladder test from 67.5 grains of RL 26 to 70 grains of RL 26. I was a little skeptical of what I would see as far as...

Hello, Recently I acquired an Interarms mark x in 7mm remington magnum. Shoots ok, But I have noticed that after only one firing New brass is difficult to chamber. Now This is after Sizing and trimming. Also after verifying that the area in front of the belt is not swollen. Still measures...

I cant find a Hornady 10th manual locally so Had to order one. Does anyone here have Data for the 7mm remington Magnum, 150 grain Eldx from that Manual? Want to get to the range this weekend with it, but wont have the manual until tuesday. Much appreciated.

So recently I ordered a Winchester XPR Sporter. In 300 Win Mag. Been wanting one for awhile. This thread will serve as an informational thread. As well as sort of a review thread. I know when I started looking for info. Good information and actual reviews of this model were scarce. Across...

Wife has been asking for a new pistol for a minute now. We stopped by the LGS recently and Looked at some of the Gen 5 Glocks. I took a liking to the G48 slimline with Silver slide. I was impressed at how comfortable for me it was. And Should be much easier to conceal than my Glock 17 was...