Where can I go to shoot a Gatling gun?

W

Waterengineer

New member
Last night on Mythbusters they played their top 25 busted myths.

One of them was to use a Gatling Gun to cut down a tree.

That gun they were using is cool. The hulls falling out of that thing was incredible.

How many shells a minute does that gun shoot?

More inportantly, I have a new item on my bucket list.

Where can I go and shoot a Gatling Gun? I don't want to cut down the tree I just want to shoot the gun.

Here is the Mythbusters episode. Start watching at about 6:45

http://dsc.discovery.com/videos/mythbusters-top-25-moments-mythbusters-top-25-moments.html
 
Last edited:
T

the rifleer

New member
You could probably talk to civil war reinactment groups, if your lucky someone local might have one. Im sure for a small price and a large in conveinience you could shoot one, errrrr, or is that a large price and small inconveinence?

I'm not even sure if they are considered full auto or not. They are around, but obviously not many people have them and to shoot one would be a real treat, but i wouldnt get your hopes too high because im sure finding one is going to be tough and getting the owner to let you shoot it would be even tougher...

And how fast they shoot is directly related to how fast you turn the crank it.
 
O

oneounceload

Moderator
There are various clubs that hold shoots and some folks bring full auto guns to shoot (some charge). Hernando Sportsmen has several machine gun shoots yearly - it's a little drive from your PB locale, but they have a web site you might check out - there might be a similar club in South FL
 
K

kraigwy

New member
Don Manning, Shooter's Choice, Yakima WA, built a full scale Galting Gun in 45-70 and black powder.

He use to run the Washington NG Marksmanship unit and put on a 1000 yard, HP Regional Match every 4th of July weekend.

He always started the match firing the galting gun at the 1000 yard targets.

It was quite impressive. He would let anyone shoot it if you furnished the ammo. It was fun but it does eat up ammo though.

Anyway check with the Washington State Pistol and Rifle Assn and see if they still have that match.
 
D

davlandrum

New member
Well, there are gatling guns, then there are GATLING guns. I think the Mythbusters actually were firing a mini-gun, which is driven by an electric motor. rate of fire IIRC is about 6,000/minute.

I found this link http://world.guns.ru/machine/minigun-e.htm

As to where you would find one of these bad boys to rip through that 6,000 rounds, I have no idea.
 
S

Scorch

New member
I'm not even sure if they are considered full auto or not.
Click to expand...
I think the Mythbusters actually were firing a mini-gun, which is driven by an electric motor.
Click to expand...
The BATFE has ruled that a hand cranked Gatling gun is not an NFA item, but add a motor and it is.
 
W

Waterengineer

New member
I don't care what the mythbusters gun is - I just want to shoot it.

Sure I will pay that's not the problem.

One OZ: link please.
 
J

Jim Watson

New member
There was a guy who brought a Gatling gun to a Cowboy shoot near here a couple of years ago. Crank out a hopper of chargers* for a reasonable fee.

*It was a repro of an early model, loaded with steel chargers containing a Minie ball and powder with a nipple for a regular percussion cap. Catch the chargers in a bucket for cleaning and reloading. Not only not a machine gun, not even a firearm, treated like a muzzleloader.
 
C

casper_au

New member
Miniguns are great fun to shoot.. A long time ago I was an armorer in the air force and one of the best days out was called a 'yippie shoot' where we'd take the serviced weapons from the armory and go 'test' them! All the gunnies would take the day off and have a bbq at the range and just blast thousands of rounds at old car wrecks, soda cans and all other sorts of improvised targets. We'd even blow up a few with some IED's for exercises and demo's for the police and federal agencies.

The minigun has a rate of fire selector where as I recall, you can select 4000-6000 rounds per minute. It has a devilishly simple operating mechanism using a helical geared carrier with a bolt for each barrel (all eight of them). When you fire it, it sounds like a long, loud, ripping sound. Same for the 20mm vulcan canon used in the hornets (only a LOT louder).
 
T

troy_mclure

New member
got to light off a minigun from a Chinook helo.

it was 160th SOAR's gun/bird.

the cool part was it used ir tracers, couldn't see the tracer without nod's(still saw all the sparks from impact tho).

got a few second burst(around 1k rounds).

it was awesome!

also went to knob creek once, great time, but bring your own ear plugs as they were going $3 a pair.
 
C

Cheapshooter

New member
Knob Creek Gun Range, West Point Ky. Just south of Louisville. They hold the Nations largest Machine Gun Shoot in April and October. Don't know if you mean a real hand cranked Gatling Gun, or a Minigun. They usually have both on the line and can be fired. Kind of pricey on the Mini, don't know about the Gatling Gun. Just to go there and see the shoot along with the Military gun show is well worth the trip.
 
F

FrankenMauser

New member
The minigun has a rate of fire selector where as I recall, you can select 4000-6000 rounds per minute. It has a devilishly simple operating mechanism using a helical geared carrier with a bolt for each barrel (all eight of them). When you fire it, it sounds like a long, loud, ripping sound. Same for the 20mm vulcan canon used in the hornets (only a LOT louder).
Click to expand...

In the U.S., you'll see a lot of references to the following rates of fire:
4,000/8,000
3,000/6,000
3,000/4,000
2,500/5,000

In reality, the most common rate of fire is 3,000 rounds per minute. Almost every minigun in the U.S. inventory has been upgraded to DillonAero specifications. That includes a fixed rate of fire, for reliability.

However, there are some exceptions. The USAF operates GE M134s on their Special Operations rotary wing aircraft (helicopters and the Osprey), but they've been given special upgrade packages. They retain their rate of fire selector for 2,000/4,000 rpm - only because of the reliability given by the Dillon parts. (Originally rated at 4,000/8,000 - the Air Force quickly learned that GE was lying through their teeth.)

100% GE guns usually can't make it through a single magazine without a major stoppage. While I was in, I saw one gunner lose an eye, two gunners get their faces ripped open, a gunner get an extractor shot through his shoulder, several severe hand wounds, and nightly "stacks". (A "stack" being a giant compressed glob of cartridges that were all fed into the same, already-loaded chamber, because a bolt failed or extractor broke. {Usually 6-8 cartridges in the space that one should occupy}) These "stacks" were the reason for the explosions that injured all of the gunners.

Dillon parts made the problems go away. Since our guys were already well versed in the idiosyncrasies of the miniguns, and keeping them running well... they got to keep their R.o.F. selector, rather than getting a fixed 3,000 rpm.
 
R

RGR3/75

New member
if you are from colorado...

then check out "dragonman's". he's got one mounted to a dune buggy you can shoot.
 
S

SVO

New member
In the Mythbuster episode, they referred to it as a Dillon minigun. I assumed that it was owned by Mike Dillon. Good while back, one of the gun magazines had an article about him & his minigun shooting up targets in the Arizona desert.
 
A

aarondhgraham

New member
You can build a reasonable facsimile,,,

All you need is a pair of Ruger 10-22 rifles, this kit from Cabela's, and an afternoon,,,
You too can own your very own hand-crank pseudo gatling gun.

One of the members at my range built one of these puppies,,,
I've never cranked it myself but I have watched him,,,
It really can go through some ammo.

Click Here Please,,,

.
 
C

Cheapshooter

New member
All you need is a pair of Ruger 10-22 rifles, this kit from Cabela's,
Click to expand...

Didn't know Cabela's sold them. A friend bought one a few years back. Great fun!!. I even saw a similar setup at Knob Creek a couple years ago for 2 SKS's! I think it was about twice the price or more though.
 
You must log in or register to reply here.
Top