canuck1911
New member
I just bought a small but well made ultrasonic celaner. I'm tryign to find some good gun cleaning solution and lubricating solution in smaller quantities. Anybody have any recommendations?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Ultrasonic gun cleaning solutions?
- Thread starter canuck1911
- Start date
F
faiello5
Guest
You can try Simple Green for the cleaner and Birchwood Casey Sheath for the protector/lube.
Regards,
Frank
Regards,
Frank
canuck1911
New member
Re; Cleaning solutions
Thanks for the advice. I would never have thought of using
Simple Green in an untrasonic tank. Have you used it this way and has it cleaned everything off the gun?
Thanks for the advice. I would never have thought of using
Simple Green in an untrasonic tank. Have you used it this way and has it cleaned everything off the gun?
F
faiello5
Guest
Read about the tip from ArmySon. Email him and he can answer your questions.
Regards,
Frank
Regards,
Frank
Ultrasconic Cleaning Solutions
I've had good luck with MPro7 for cleaning. It is expensive but can be filtered through cheesecloth and reused several times. For lubrication, I've tried various solutions and decided to lube by hand to limit over-lubing. Police Products Corporation offers several cleaning and lubing solutions. Good luck.
Jeff
I've had good luck with MPro7 for cleaning. It is expensive but can be filtered through cheesecloth and reused several times. For lubrication, I've tried various solutions and decided to lube by hand to limit over-lubing. Police Products Corporation offers several cleaning and lubing solutions. Good luck.
Jeff
canuck1911
New member
MPro7
I've read about MPro7 but never used it. Glad to hear you like it. Do you think it would work if I sprayed it on the gun, then after a few minutes dropped it into an ultrasonic tank of water, or Simple Green, rather than filling the whole tank with it? I'm thinking the ultrasonic action would
help the sprayed on MPro7 work better and also clean away everything that it loosened. Lubing by hand is not a problem.
I've read about MPro7 but never used it. Glad to hear you like it. Do you think it would work if I sprayed it on the gun, then after a few minutes dropped it into an ultrasonic tank of water, or Simple Green, rather than filling the whole tank with it? I'm thinking the ultrasonic action would
help the sprayed on MPro7 work better and also clean away everything that it loosened. Lubing by hand is not a problem.
What I do is put a small amount of MPro7 in a zip loc bag or two and put the bags with various gun parts in the ultrasonic tank filled with water. It works very well and doesn't require a large amount of this expensive solution. I then rinse the parts with water, dry thoroughly and lube.
Jeff
Jeff