You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Sightmark sight on shotty
- Thread starter papadave
- Start date
I put a Burris SpeedBead on mine and so far so good. That looks like a close relative designed to mount on a rail. I don't have any rails, lights, bayonet mounts, or such, and I don't have any idea how good the repeatability would be taking it on and off. For rifle like accuracy only the very top dollar detachable systems seem to achieve livable results, but on a shotgun it might be okay.
Have never used a Sightmark in a shotgun but I can let you know my sightmark experience.
I bought one to put on my 45colt. First thing I notices was their instructions were vague. the system of for adjusting the sight was rinky dink. A disk with numbers on it that you slide over a screwdriver. Two settings high and low.
The high was so bright that all you saw was starburst on the scope. I thought it might be me , so I put on my proscription glasses. nope . it was the scope. the lower setting seemed ok untill i went outside, Couldn't even see the dot on low even in relatively low light. Only in EARLY twightlight hours. But I figured I could get some SMT resistors and fix that problem later . got it on my ruger took it out to the range and used it on high setting to shoot 25 yards. shame the brightness settings are off because it does have a small moa dot . after shooting about 8 cylinders full of powder-puff handloads, the plastic section where brightness switch is housed ,fell off dandling by the wire to the switch. thought it was loose screws holding it on .nope. screws were still there . the plastic broke inside the housing where the screws go.
I go online to see where to send it. No address. I have to download a form.
So I go online to download their warranty form .it wouldn't let me do that till talked to a rep. I call up the service rep . He tells me No problem it has a lifetime warranty.But I have to go back to the website and do the form. This time I clicked "yes" to the "have you talked to a rep yet" . After I finished the form It said I'd get an email in 2-3 days.. been 5 days now. no email yet.
wished I'd save a few more dollars and bought a burris fastfire.
If you want a Cheap Red dot I recommend a tasco redot . I have 2 of those .Only like 35 bucks and I don't think you can knock the dang things off zero.I got one on my 45-70 buffalo classic and I have shot some elephant loads in it . No problem. Put one on my Mag Rifle. No problem. they rate them to 357 mag on a handgun and i believe that's not an exaggeration.
There are others out there like Konus and others .but their dots look like 7 moa instead of 5 moa. not much good over 50 yards because the cover up your target/game.
yup , i know This Thread is more than 232 days old but i feel any help to people who Google by is good and might get them enlisted in the forum.
I bought one to put on my 45colt. First thing I notices was their instructions were vague. the system of for adjusting the sight was rinky dink. A disk with numbers on it that you slide over a screwdriver. Two settings high and low.
The high was so bright that all you saw was starburst on the scope. I thought it might be me , so I put on my proscription glasses. nope . it was the scope. the lower setting seemed ok untill i went outside, Couldn't even see the dot on low even in relatively low light. Only in EARLY twightlight hours. But I figured I could get some SMT resistors and fix that problem later . got it on my ruger took it out to the range and used it on high setting to shoot 25 yards. shame the brightness settings are off because it does have a small moa dot . after shooting about 8 cylinders full of powder-puff handloads, the plastic section where brightness switch is housed ,fell off dandling by the wire to the switch. thought it was loose screws holding it on .nope. screws were still there . the plastic broke inside the housing where the screws go.
I go online to see where to send it. No address. I have to download a form.
So I go online to download their warranty form .it wouldn't let me do that till talked to a rep. I call up the service rep . He tells me No problem it has a lifetime warranty.But I have to go back to the website and do the form. This time I clicked "yes" to the "have you talked to a rep yet" . After I finished the form It said I'd get an email in 2-3 days.. been 5 days now. no email yet.
wished I'd save a few more dollars and bought a burris fastfire.
If you want a Cheap Red dot I recommend a tasco redot . I have 2 of those .Only like 35 bucks and I don't think you can knock the dang things off zero.I got one on my 45-70 buffalo classic and I have shot some elephant loads in it . No problem. Put one on my Mag Rifle. No problem. they rate them to 357 mag on a handgun and i believe that's not an exaggeration.
There are others out there like Konus and others .but their dots look like 7 moa instead of 5 moa. not much good over 50 yards because the cover up your target/game.
yup , i know This Thread is more than 232 days old but i feel any help to people who Google by is good and might get them enlisted in the forum.
Last edited:
update
Called back again . This time got another rep who gave me an authorization number . Boom---had the new sight at my PO box in 2 days..This sight seems like the lower setting is usable.. Hopefully this sight holds up better...
Had to post this to say that they did,in fact ,honor the warranty..
Called back again . This time got another rep who gave me an authorization number . Boom---had the new sight at my PO box in 2 days..This sight seems like the lower setting is usable.. Hopefully this sight holds up better...
Had to post this to say that they did,in fact ,honor the warranty..