SIG P238 / Kimber 380?

A comment in this thread mentions that the trigger pull on the P238 is 8 pounds. By this time most people are aware that the P238 and the new Kimber 380 are copies of the Colt Mustang, which in turn was derived from the Spanish Star Model D. But the P238 and the new Kimber 380 have a removable mainspring housing, where the Colt does not. It would seem that this would make it far easier to remove the mainspring and clip a couple of coils to reduce trigger pull.

Has anyone tuned the trigger on a Mustang, P238 or Kimber 380? How did you approach it, and what did you get for a trigger pull?
 

JJNA

New member
I'm curious about this as well. I wonder the makers deliberately set the poundage high since there is no grip safety on these guns and since they might be pocket carried.
 

pat701

New member
The reason i am afraid to buy used firearms is because of guy's watching youtube and thinking that they are gunsmiths.
 

Bill DeShivs

New member
It's seldom necessary to reduce mainspring tension on single action guns. Proper stoning of the sear engagement surfaces will usually suffice.
 

sixgunluv

New member
Trigger Pull

Have a trigger pull gauge so i decided to check poundage on a few pistolas after reading this post.

Star BM9 w/faux ivory grips 3lb 12oz. (Range/practice)
Star BM9 w/wood grips 5lb 5oz (EDC)
Taurus PT 809 5lb 12oz. (EDC)
Taurus PT 809 6lb 4oz. (Range/practice)
 

Attachments

  • Star BM Grip1.jpg
    Star BM Grip1.jpg
    120 KB · Views: 17

proscene

New member
Trigger Pull

I have both the Kimber Micro CDP and two Sig P238's.
I see no reason to alter either one, they both feel "right" to me.
 
I have both the Kimber Micro CDP and two Sig P238's.
I see no reason to alter either one, they both feel "right" to me.
Hasn't ANYONE who owns a P238 or a Kimber Micro actually measured the trigger pull?
 

Ibmikey

New member
Proscene is correct, there is no reason to clip coils as that is a certain way to make these reliable little pistols fail you when needed most. This is a defensive pistol and should not have a match target trigger pull. Do some drills where you are drawing, moving and firing, the trigger pull will then seem as smooth as butter.
 
Top