Ruger SP101 Reassembly Help

[Captains1911]

I'm trying to reassemble my SP101, and after I reinstall the trigger, I cannot pull the trigger, it is locked up. Everything I've read and watched says I should be able to pull the trigger and cycle the action normally at this point. The transfer bar is in the correct location. Any help here would be appreciated.

 

[Micahweeks]

Can you post some pictures? Preferably with the trigger assembly in and out of the frame?

 

[Captains1911]

photos added

 

[5-SHOTS]

I had a DAO SP101 a couple years ago. I disassembled it completely to do a trigger job and, if i remember well, the tricky part was to intall correctly the little plungers with their springs and, in particular, the hand's one; it's easy for the hand to move too forward and dislocate its plunger.

 

[Captains1911]

I figured it out, the plunger for the pawl had become partially dislocated. All is well.

 

[s3779m]

Know the feeling, glad all is well.

 

[GP100man]

Yep , the sp is basically the same , but as you`ve found is kinda touchy while handlin it to reassemble it to the frame.