Deaf Smith
New member
In original box, 4 inch bbl, stainless, excellent condition and tight.
So is $400 to much?
Deaf
So is $400 to much?
Deaf
Ruger Service Six
- Thread starter Deaf Smith
- Start date
NoSecondBest
New member
Service Six? No rear sight, correct? It's not something I'd pay too much for. It's probably OK for home defense but that's about it....for me anyway.
Blacktimberwolf
Moderator
I paid 125 bucks, with pachmayr grips and i love that gun.
leadcounsel
Moderator
Yeah, these are excellent revolvers. I don't care for the spindly thin grips, so if you intend on swapping those out that's another $20-50.
Is it .38 or .357?
$400 for an excellent .357 or even a .38 is a very good price... I simply prefer the .357 for versatility and self defense. But either way, you won't lose money at $400, and I think these value will double in the near term. Since these manufacturing processes aren't done any longer, and these hand-fitted and hand polished metal guns are disappearing into collections, these are along the same lines as the popular Colt revolvers now commanding north of $1000...
I've stumbled on these a couple years ago and been buying them when I see them all between $300-400. Going to buy an abused Security Six 357 this weekend for $300... Figure it'll make a good back-woods or truck gun. And $200 worth of refinishing could result in a new looking gun.
Is it .38 or .357?
$400 for an excellent .357 or even a .38 is a very good price... I simply prefer the .357 for versatility and self defense. But either way, you won't lose money at $400, and I think these value will double in the near term. Since these manufacturing processes aren't done any longer, and these hand-fitted and hand polished metal guns are disappearing into collections, these are along the same lines as the popular Colt revolvers now commanding north of $1000...
I've stumbled on these a couple years ago and been buying them when I see them all between $300-400. Going to buy an abused Security Six 357 this weekend for $300... Figure it'll make a good back-woods or truck gun. And $200 worth of refinishing could result in a new looking gun.
Deaf Smith
New member
.357.
Total $433. tax incl.
Yep just got it. Can't find a scratch on it. Even has the papers with it.
Will shoot tomorrow.
Deaf
Total $433. tax incl.
Yep just got it. Can't find a scratch on it. Even has the papers with it.
Will shoot tomorrow.
Deaf
Deaf Smith
New member
Ok.. tomorrow I'll have a 'family' picture.
Deaf
Deaf
Service Six has a fixed channel style rear sight; the Security Six has the adjustable rear sight.
This image shows the difference if you look at the rear sight close enough.
This image shows the difference if you look at the rear sight close enough.
Instead of asking myself "Is it too much", I ask myself "When was the last time you saw one for less? How long before another one comes along?"
So what if you pay a few bucks more for it than "it's worth." If you want it, get it.
Now if you're planning to flip it for profit, the above doesn't apply, but if you just want the gun for yourself...
So what if you pay a few bucks more for it than "it's worth." If you want it, get it.
Now if you're planning to flip it for profit, the above doesn't apply, but if you just want the gun for yourself...
Congrats.
It's worth whatever amount of disposable pocket money you have with which you're willing to part.
I'm the original owner of a Service-Six, myself.
I don't have the original box anymore, but as I recall it was listed as a .357 Magnum 4" Heavy Barrel Model. I had the grip frame modified to RB, and had the guys at MagNaPort do a Duty-Tune (and then promptly installed the factory mainspring upon its return), and let them port it while they were at it. Fast-handling, accurate, smooth and with the lively balance of a "short" 4" duty gun.
Nice medium-framed, medium-bore DA revolver.
I was disappointed when the GP series replaced the Security series (and remain so to this day).
I stopped doing more than occasional range quals with the Service-Six because of how nice my SP101DAO demonstrated itself to be (once I'd identified and corrected a burr that was causing it to seize after several cylinder loads of 125gr Magnum rounds).
I'd let the MNP guys try their Quad-Porting on it, back when that was a new process (and they assured me I'd like it and not want the barrel replaced). While it does offer the same potential disadvantage for some close range/retention shooting, when fired at reasonable extension it allows for some excellent muzzle rise control.
I've demonstrated to a bunch of other revolver guys how the little 101 can be fired as fast as the trigger can recover, remaining "on-target" without muzzle rise. Sure, the same amount of felt recoil force is still being delivered to the palm of your hand (which makes 158gr & 180gr loads still rather impressive), but the metered set of ports lets the muzzle remain level during rapid shot strings (but still with all the attendant muzzle blast/noise you expect from porting). I forget the figures they quoted me all those years ago, but they said the amount of velocity lost was surprisingly not bad.
One of the guys I let try the gun at work has been trying to talk me into selling him that 101 for years. he used to own a similar size 2.25" 101, but never cared for the muzzle snap/whip when shooting Magnum loads. He was amazed when he tried mine with 125gr Magnum loads, and had a hard time believing the muzzle/sights remained on-target when rapidly triggering the gun.
I've always wanted a TDA 3" 101, though.
It's worth whatever amount of disposable pocket money you have with which you're willing to part.
I'm the original owner of a Service-Six, myself.
I don't have the original box anymore, but as I recall it was listed as a .357 Magnum 4" Heavy Barrel Model. I had the grip frame modified to RB, and had the guys at MagNaPort do a Duty-Tune (and then promptly installed the factory mainspring upon its return), and let them port it while they were at it. Fast-handling, accurate, smooth and with the lively balance of a "short" 4" duty gun.
Nice medium-framed, medium-bore DA revolver.
I was disappointed when the GP series replaced the Security series (and remain so to this day).
I stopped doing more than occasional range quals with the Service-Six because of how nice my SP101DAO demonstrated itself to be (once I'd identified and corrected a burr that was causing it to seize after several cylinder loads of 125gr Magnum rounds).
I'd let the MNP guys try their Quad-Porting on it, back when that was a new process (and they assured me I'd like it and not want the barrel replaced). While it does offer the same potential disadvantage for some close range/retention shooting, when fired at reasonable extension it allows for some excellent muzzle rise control.
I've demonstrated to a bunch of other revolver guys how the little 101 can be fired as fast as the trigger can recover, remaining "on-target" without muzzle rise. Sure, the same amount of felt recoil force is still being delivered to the palm of your hand (which makes 158gr & 180gr loads still rather impressive), but the metered set of ports lets the muzzle remain level during rapid shot strings (but still with all the attendant muzzle blast/noise you expect from porting). I forget the figures they quoted me all those years ago, but they said the amount of velocity lost was surprisingly not bad.
One of the guys I let try the gun at work has been trying to talk me into selling him that 101 for years. he used to own a similar size 2.25" 101, but never cared for the muzzle snap/whip when shooting Magnum loads. He was amazed when he tried mine with 125gr Magnum loads, and had a hard time believing the muzzle/sights remained on-target when rapidly triggering the gun.
I've always wanted a TDA 3" 101, though.
Last edited:
Deaf Smith
New member
Well it ain't the best picture of my 'Six' famly but here they are.
Shot the Serviice Six today. Maybe an inch low using 158gr LSWC reloads at 10 yards. 158gr Magnums shot right on. All shots in about 2 inch circle firing off hand.
Service Six 4 inch.
Security Six 4 inch.
Speed Six 2 3/4
Speed Six 2 3/4
Security Six 2 3/4
I just need one more... A 3 inch Speed Six but that might take a while.
Deaf
Shot the Serviice Six today. Maybe an inch low using 158gr LSWC reloads at 10 yards. 158gr Magnums shot right on. All shots in about 2 inch circle firing off hand.
Service Six 4 inch.
Security Six 4 inch.
Speed Six 2 3/4
Speed Six 2 3/4
Security Six 2 3/4
I just need one more... A 3 inch Speed Six but that might take a while.
Deaf
