Watching some videos of this unit it seems to fit what I want but it's reviews are about 50-50 for a $300.00 unit. Does anyone have and use one and is it worth it? I single load everything and weighing powder is slowest part for me . I usually load about 200 pistol cases a week and about the same in 6 rifles.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Rcbs Chargemaster Combo
- Thread starter Wendyj
- Start date
The RCBS ChargeMaster is far from an inexpensive powder weighing system in reloading coming in around $300 for the complete solution. Personally yes, I do have one and I do use it. Loading primarily .223 Remington and .308 Winchester with a variety of powders the unit has given me consistent and accurate loads with the consistency or better put repeatability being excellent. When I first got it I did powder throws and compared the weights on my old but reliable Lyman M5 scale with excellent results. The ChargeMaster weighs out excellent charges for me using either Stick and Extruded Powders as well as Ball and Spherical Powders.
I guess this will come down to would I buy one again? Absolutely and without hesitation I would buy one again. While my existing unit was a gift I would not hesitate to plop down the price buying one for myself. Other similar units have sprouted up out there and I can't speak for them but I would not hesitate to buy another RCBS unit in a heart beat.
Just My Take....
Ron
I guess this will come down to would I buy one again? Absolutely and without hesitation I would buy one again. While my existing unit was a gift I would not hesitate to plop down the price buying one for myself. Other similar units have sprouted up out there and I can't speak for them but I would not hesitate to buy another RCBS unit in a heart beat.
Just My Take....
Ron
I had looked at it and the Hornady lock n load but all reviews show the Hornady overthrows a lot. Cabelas has the Hornady on sale for 210.00 right now and midway has the rcbs on sale for 299.99. Both have about as many reviews but the Hornady seems to have issues with Varget unless on super slow speeds. I need to load at least 100-150 308 with Varget every other week and imr 4831 for 7 mm. Imr 4350 and h4831 sc for 260. Maybe 200 rounds of rite group and unique weekly. Like to save money but don't want to throw away on one that won't work. I'm tired of using Lee powder thrower and trickling up for every load.
Does anyone have and use one and is it worth it?
I've been using one for about 8 years. When I bought it, the reviews were mixed and I had similar concerns. But I haven't had a single issue with mine. And if it broke tomorrow, I would order another.
I have the hornady lnl. I use mostly 4064 for powder but also 4895 and 2230. It's very consistent. There are multiple ways to fine tune it so it doesn't overcharge. Specifically the trickle speed and trickle start time. With stick powder most of the overcharges come when the trickle occurs and it drops more grains than it should. It's a function of how many grains of powder are at the end of the tube when it trickles. With stick powders it's a little more variable. It's not problematic. I would buy one again in a heartbeat. The rcbs is nice too. You can frequently get the hornady for $169 at Natchez sometimes grafs.
I use mine for stick powders in rifle more than anything else.
For pistol small charges of a flake powder that meters well, I use a powder throw.
Yes I like it, as well as a electric case trimmer, and a 5 head case prep center are things that got rid of tedious aspects of loading for me.
For pistol small charges of a flake powder that meters well, I use a powder throw.
Yes I like it, as well as a electric case trimmer, and a 5 head case prep center are things that got rid of tedious aspects of loading for me.
I have a Hornady Auto Charge, I added the same reducing insert you can get for the RCBS Chargemaster Combo. It really reduces the overthrows with the problem powders. Just watch the videos of adjustments you need to make to the speed for certain types of powders.
Anyway, I'd have confidence with either one, but really only use it for smaller batches. .45 Colt of lets say 50 rds of Unique. Also for most Rifle loads of 20 or less, it's just to slow for my heavy reloading batches of 300+.
BTW, don't forget you can get $75 off on the RCBS, also if you can wait the Hornady usually goes on sale for under $180. I picked mine up for under $169, just waited long enough for it.
Little hints? Make sure you let it stabilize by warming it up for a minimum of 15 minutes, and get the reducing insert. It's just more consistent and it won't wander.
Anyway, I'd have confidence with either one, but really only use it for smaller batches. .45 Colt of lets say 50 rds of Unique. Also for most Rifle loads of 20 or less, it's just to slow for my heavy reloading batches of 300+.
BTW, don't forget you can get $75 off on the RCBS, also if you can wait the Hornady usually goes on sale for under $180. I picked mine up for under $169, just waited long enough for it.
Little hints? Make sure you let it stabilize by warming it up for a minimum of 15 minutes, and get the reducing insert. It's just more consistent and it won't wander.
TECH TIP: How to Speed Up Your RCBS ChargeMaster 1500 is a very good read on how to modify the original software programming and other tips to modify the ChargeMaster. Mine is still set to the factory defaults but for those interested in modifying for certain loads the link is useful.
Ron
Ron
SSGCharlie
New member
Have the RCBS Charge Master 1500 for about 8 years now and have not had any problems with it. I use it on stick powers and to verify power throws on my Dillon 550B.
Would buy another in a heart beat.
SSGCharlie
Would buy another in a heart beat.
SSGCharlie
I had 1 problem in 12 years. The unit didn't go on, called RCBS they ( customer service ) said it was out of warranty an wouldn't service it . RCBS isn't making it any longer. You can still get them from midway, Nathez & Midsouth. I removed the voice lable to get to the screws, I had nothing to loose at this time, there was a few powder grains of IMR 4064 under the circuit board. Put it back together, glade I did. Its working just fine. Nothing lasts forever, my ChargeMaster is still going strong. Don't know why they stopped making it. Give RCBS a call just to double check.
I had looked at it and the Hornady lock n load but all reviews show the Hornady overthrows a lot.
What's "a lot"?
The RCBS is only accurate to .1gn, with the right powder, you can get that consistency with a volume measure.
With a regular scale and a proximity sensor or optical switch you can get resolution to +\- a kernel of powder.
https://www.youtube.com/watch?v=nA0_KDjbBGQ
In use it looks like this.
https://www.youtube.com/watch?v=ACd3yt0J3Bg
Could you message me a parts list of what was used to make this? I already have a tricklerWhat's "a lot"?
The RCBS is only accurate to .1gn, with the right powder, you can get that consistency with a volume measure.
With a regular scale and a proximity sensor or optical switch you can get resolution to +\- a kernel of powder.
https://www.youtube.com/watch?v=nA0_KDjbBGQ
In use it looks like this.
https://www.youtube.com/watch?v=ACd3yt0J3Bg
Sent from my SM-G920V using Tapatalk
From reviews and videos either unit could throw a few tenths of a grain. Most reviews are for the Rcbs but Hornady has slower options to program in. I'm going with the Hornady to start with because I can buy straight from Cabellas and I have a 20.00 coupon which will put it at $189.00 without tax but no shipping. Natchez could have beat this by $10.09 but Cabelas will give me 60 days to return to store with full refund if not happy. I'm going to take my chance and have assurance I can do a store return. If not happy I will jump to the Rcbs. I can't lose either way. I'll like it or return and go Rcbs. I really appreciate everyone's input. I trust the people on here much more than an online review.
Wendy, I still highly recommend the little adapter for the tube, makes a world of difference. It's on ebay. I just wrote to him with the details, and it fit perfectly. It was really just a few bucks, but I've used it on Varget, and don't have any real issues. One little hint with these things is also make sure you don't have a strong draft around them. Personally I keep it on a different bench than what I'm reloading on to minimize vibrations.
What is the adapter called and do you have a link to it. I would gladly order. Our kids are all grown and gone so I have turned on of their bedrooms into a reloading room. I thought the same thing about a smaller bench away from my reloading bench. It shakes too much when sizing and loading bullets. Good and sturdy I just have a lot of stuff organized on it and a Riser for my press.
Well I got the lock n load today and loaded up 50 308 with Varget and imr 4064. Loaded about 25 7 mag with RL 22. Tried unique through it and Titegroup and it threw perfect. I had 2 overcharges on fastest speed with imr 4064 by .2 grain but dropped back in and all was well. I probably wouldn't use the Titegroup in it as the Lee powder thrower is just as close. Also Titegroup was a bear to clean out of dispenser. Everything matched up weight wise with my Rcbs 505 and a small Hornady digital I have. Best $180.00 I've spent reloading yet. 59 more days to make sure all is good or go back and get my money back and get the chargemaster. If it continues to work like this I won't look back. Now to get a Rcbs prep station. Thanks for all the comments.