Need Help!!!!!

Si6

New member
Helpppppp

I mistaken loading mag rifle primers in a non mag load.. here is the data

25 grains imr 4895 nosler balistic tip 50 gr bullet in a 30/30 case necked to .219

the question is...do i pull them and pop the caps or are they safe to shoot??

Please advise
 

larryw

New member
The safe thing is to pull them and start again.

But, where in the load map does the 25gr powder charge fit? For sake of discussion, suppose you were going to work up this .219-30/30 load using magnum primers instead of standards, what powder charge would you start at?
 

steelbuster

New member
Old post but here goes.....I loaded some 44Mag rounds with AA9 and used some Mag primers instead of the usual Win WLP primers. With a midpoint load that was normally very moderate pressure, the cases stuck in the chamber and showed other signs of extreme over pressure. Same result when tried in 357Mag.
I called Accurate and they had had similar experience....Reminded me to follow listed load exactlly or I was "on my own".
 
Top