I have two Radom P-64s, and the safety catch stopped working on one of them. I noticed the dreaded broken hammer catch, that is keeping me from moving the safety, but the gun still fires. It broke while the safety was off, but it's still keeping the firing pin contained so the gun will still fire. I'm sure it won't last much longer, and the safety/hammer catch has historically been a hard item to find. Anyone have leads on replacements?
My P64 broke
- Thread starter noelf2
- Start date
If I remember right, one of the big P-64 importers (maybe Tennessee Gun) used to have bunches of guns that weren't good enough to sell whole so they kept them for parts. However, I seem to recall Tennessee Gun getting shut down so I don't know what happened to all those spare parts. Maybe someone else bought them up.
I don't have a P-64 anymore, but this site used to keep a good supply of parts.
https://www.robertrtg.com/store/pc/P64-c202.htm
https://www.robertrtg.com/store/pc/P64-c202.htm
It's an ebay auction with multiple safeties for sale. Fellow in Poland posts parts on eBay now and then.
https://www.ebay.com/itm/P64-CZAK-P...014672?hash=item287c3c3e10:g:zuEAAOSw9bFcriF1http://https://www.ebay.com/itm/P64-CZAK-POLISH-RADOM-SAFETYI-LEVER-F-SELECTOR-ORIGINAL-VINTAGE-PART-POLAND/173883014672?hash=item287c3c3e10:g:zuEAAOSw9bFcriF1
https://www.ebay.com/itm/P64-CZAK-P...014672?hash=item287c3c3e10:g:zuEAAOSw9bFcriF1http://https://www.ebay.com/itm/P64-CZAK-POLISH-RADOM-SAFETYI-LEVER-F-SELECTOR-ORIGINAL-VINTAGE-PART-POLAND/173883014672?hash=item287c3c3e10:g:zuEAAOSw9bFcriF1
Last edited:
The new (to me) safety catch came in today. After a couple hours of trying and cursing, it finally all went back together. If you ever have to do this, find a big cardboard box to sit in. I launched the firing pin and spring a couple times, and the safety plunger/detent several times also. I thought I hopelessly lost the detent once, but found it. To add to the fun, the little lock for the loaded chamber indicator pin fell out, and it was a bear to get back in too. Would have helped if I had a third hand. I think the next guns I get rid of will be my P64s. 
Reviving an old thread, hammer catch / safety / decockers now at RTG
robertrtg.com has the decocker/safety now. Not sure how long they'll have them, but they are only $20. If you have a P-64, you would be wise to buy one of these as a spare. It's the most broken part in a P-64. They have the safety plungers too, and they are easy to lose when replacing a safety/decocker, so it would be smart to get one of them as well (they're cheap).
https://www.robertrtg.com/store/pc/P64-SAFETY-202p7734.htm
robertrtg.com has the decocker/safety now. Not sure how long they'll have them, but they are only $20. If you have a P-64, you would be wise to buy one of these as a spare. It's the most broken part in a P-64. They have the safety plungers too, and they are easy to lose when replacing a safety/decocker, so it would be smart to get one of them as well (they're cheap).
https://www.robertrtg.com/store/pc/P64-SAFETY-202p7734.htm
Last edited:
ballisticxlr
New member
try gunpartscorp.com
RTG, I check out their site pretty regularly. I get a lot of my Tokorev parts from them as well. I did pick up one safety years ago, some guy made a batch in a machine shop. They had a bit different profile on the lever portion, but the internal side looked the same, it functioned well. I have a number of P64s, just got another one from Centerfire Systems the other week. Figure if I'm going to shoot and carry them I should have some spare parts.