Mossburg 20ga Plug?

B

Brian Pfleuger

Moderator Emeritus
I've got a mossburg 20ga semi that will only hold 3 rounds. I figured the obvious answer was a plug but I see no indication in the instruction manual that there would be such a thing. (I got the gun used.)
Now, normally I wouldn't expect to have a problem with such a thing but I have torn this gun apart as far as I can go without using an acetylene torch:rolleyes: (I think) and I see no evidence of any removable plug.

Did Mossberg actually manufacture a gun that only holds 3 shells?:confused:
 
H

hogdogs

Staff In Memoriam
It is a wooden dowel. Just unscrew the barrel and remove it. inside the hole I insert a sharp straight dental pick to steer it and insert rounds to push it forward... It may or may not still have rubber o-rings on it....
Brent
 
H

hogdogs

Staff In Memoriam
OOOPPPPPSSSS...
AUTO... Just noticed. It may be a 3 shot total capacity... what model is it?
I will look it up for you.
Brent
 
S

Scorch

New member
Some were staked at a single point, which could possibly be removed. Others were staked by machine that made a ring all the way around the magazine, which would be next to impossible to remove and would require replacing the magazine tube.
 
You must log in or register to reply here.
Top