You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Misplaced or lost T3 Magazine
- Thread starter Picher
- Start date
precision_shooter
New member
I bought my Tikka shortly after they were introduced and also bought a spare mag around the same time. I've slept since then, but I think I paid somewhere around $35-$40 for the mag back then and the rifle was around $500 out the door... Crazy to see how much prices have increased over the years...
Last edited:
In a word, ebay.
There are several for $35 NIB and also auctions. That is how I picked up mine, "on the cheap".
And I always count my mags in my range bag after shooting! Lesson learned!
Extra mags are very helpful after hand loading different loads. For example pretty normal for me to have 125 grain in one mag and 200 grain in another.
There are several for $35 NIB and also auctions. That is how I picked up mine, "on the cheap".
And I always count my mags in my range bag after shooting! Lesson learned!
Extra mags are very helpful after hand loading different loads. For example pretty normal for me to have 125 grain in one mag and 200 grain in another.
On this rifle I have a scope with a BDC reticle. I keep notes on my loads, including POI in relation to the BDC along with BC of the bullet and drop.
It really is not that difficult to memorize which line corresponds to which load at what distances; then again I always test out my loads at the range with a chrono and actual targets at varying ranges. And if I am not sure, I always have the numbers stuck to the bottom of the mag; I just write down the drop on paper and affix it to the bottom and keep a copy in my pocket in case it falls off during use.
I generally don't adjust my scope, I keep it set to my "favorite" hunting load, and then adjust everything else to that standard.
It really is not that difficult to memorize which line corresponds to which load at what distances; then again I always test out my loads at the range with a chrono and actual targets at varying ranges. And if I am not sure, I always have the numbers stuck to the bottom of the mag; I just write down the drop on paper and affix it to the bottom and keep a copy in my pocket in case it falls off during use.
I generally don't adjust my scope, I keep it set to my "favorite" hunting load, and then adjust everything else to that standard.
It really depends on the rifle in most cases. I've had a few that would put several loads into pretty much the same POI at 100 yards. At longer ranges heavier bullets would drop a little more, but that was easy to compensate for as long as you knew what was in your gun.
Other guns would not be close enough to try to use with more than 1 load. I have 1 rifle that if zeroed with 130 gr bullets will shoot 150's 2" right at 100 yards. If I zero it for the 150's, then the 130's are 2" left. I just picked one and don't try to use the other.
Other guns would not be close enough to try to use with more than 1 load. I have 1 rifle that if zeroed with 130 gr bullets will shoot 150's 2" right at 100 yards. If I zero it for the 150's, then the 130's are 2" left. I just picked one and don't try to use the other.
hoghunting
New member
In a word, ebay.
There are several for $35 NIB and also auctions. That is how I picked up mine, "on the cheap".
Have to agree as I've done the same, even bought a new one on Gunbroker for $35. You just have to keep checking.
If I zero it for the 150's, then the 130's are 2" left
It always amazes me when I compare factory loads to my loads. It appears counterintuitive to me that there would be a horizontal difference, yet there she blows! Amazing how the "real world" can surprise!