You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Loading Brass Shotgun Shells
- Thread starter MPP1423
- Start date
Cap n ball
New member
You might find that info here. http://huntingsociety.org/reloaders.html
I have done it, but not recently. I believe I have 2 boxes of 25 loaded and ready for firing. The brass is Brass Extrusion Labratory Limited (B.E.L.L.). It takes a Large rifle primer. I loaded them with some hand made tools, a 12 guage Lee (Hand) Loader and some help from a M.E.C. 650. I used 700X powder, #8 shot and 10 ga plastic wads ( that's right, 10 ga.). I sealed the top with some old paper cardboard wads glued in with a large amount on Elmer's Glue (which actually hardens and holds the whole thing together). It was a long, tedious process (for me at least) and I do not think I will do it again. Quantrill
Old Dragoon
New member
Look on Ebay and the gun auction sites for shotshell loading press under reloading. I have seen some availablle on these sites. You need at a few for your belt just to show off when you do the CAS thing.