No, but thanks for your reply, it is really appreciated GG - actually the dust/fine grit had fallen down a very clean bore into the chamber area and probably stuck on oil residue and the sides, as the new brass PMC reloaded round is briefly extracted each reloading of the 12GA barrel(8 shots of 1-1/4 OZ #5BR for x6 crows that AM !!)when the CZ-combo under barrrel was scraped briefly on the dusty wall. The bore was checked for obstructions (of course), but dust in the chamber/throat area was missed and there was enough clearance for the round to chamber OK....though now you mention it, it was "stickier" than usual, but that is often due to unburned magnum powder in cold conditions in the tight S/S action, especially if unloaded on an angle.. EG under a camo net.[But as you can imagine action was hectic with angry crows flying 10m above me on the lookout for the "bounder" who ruffled a few of their their buddy's feathers!]
Would the balloon(in the ever-popular kahaki colour of course!)or ditto tape over the muzzle upset the POI ? I only usually shoot 45m to 120m with this .223 rifle, as sights are a tip-off shotgun type 32x2.5 magnification only, so it may not significantly.
All the best GG,thanks again for your FL reply... safe hunting -BB.
------------------
If we shooting sportspersons don't hang together... we will all hang separately !
Never knock another's different shooting interest or discipline...REMEMBER we are all but leaves on the same tree of freedom.