Has anyone owning one of these,917vs's, glass bedded the laminated stock. I know there is not much of any recoil, but while reassembling mine, I found that the barreled action kinda floats around in the stock quite a bit due to the round barrel/chamber/action design. I had to just move it back and forth to seat the action screws and align the magazine box. There also appears to be quite a gap in the tang area from stock to tang. Seems to me that at least bedding this action would hold everything in the same relationship all the time, if nothing else. Comments please.
Bedding Marlin 917vs
- Thread starter texfar
- Start date