Search results

Been through my list of data I have and can't find any data on using a 200 grain Hornady ELD-X and IMR 7828SSC. I've been loading 185 grain Berger VLD's over 80 Grains of 7828ssc with great one hole three shot groups at 100 yards from sand bags. The gun is a custom Remington 700 Sendero with a...

Needing advice on my hand loads not chambering. Here is what I've got, I'm loading up 460 Rowland using new star line brass that's been sized, a slight bell of the case mouth, Bullet I'm using is hornady 250gr XTP of the .452 size with a case over all length of 1.255. Problem I'm having is...

I'm looking at loading lead hard cast .452 of the RNFP type for my 460 Rowland. I'm wondering if I can push a hard cast with out gas checks to the 1300-1550 fps range without problems. Correct me if I'm wrong but doesn't a lead bullet require a gas check for these types of velocities to prevent...

I seem to be having a hard time finding data on the 460 Rowland. Ive found quite a bit using AA#7. Only problem with this is that I cant locate any AA#7 locally. I have an ample supply of Unique,Power Pistol, bullseye Red Dot and 2400. I was hoping to be able to use one of these powders for a...

Looking for a small supply of 460 Rowland brass. I have been looking for some time now, As I have the Gun and conversion set up ready to go. Not a single piece of brass I have found. Any advice on where to find some? I don't need much. Would pretty much buy any amount really.

If anyone happends to have the Berger manual, Can you give me some information. What im needing is, .257 Weatherby Mag using the 115 Grain VLD *Case over all Length *RL-22 Min to Max charge, and Velocity for this powder *Retumbo Min to Max charge, Velocity for this powder. Thanks guys. I...

Is there any special steps on forming 257 Weatherby from 7mm mag brass? From what I read all you do is lube the 7mm and run it through your 257 full length die and your done.

I've been trying to find his load data for the 200gr xtp that was so hot to make myself some of them. Here is what I've found so far. CAUTION: The following post includes loading data beyond or not covered by currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the...

I'm needing help looking for a 6 inch barrel for my Rock Island 10mm. The problem I'm having is this gun is a factory bull barrel and I cant find a bull 6 inch barrel. Is there such a thing? Gun is great how it is, But its used for pig and deer hunting out to 50 yards. Would like to get the...

I bought this new ruger m77 all weather last week and didn't really notice how rough the bolt was until I got it home. I've went through the action and I haven't found any flaws and it's been lubed with quality lube. I've cycled the acting so many times I can't count anymore. I can honestly say...

Looking for reloading data for the 6.5 creedmoor. I've got brass , cci mag and normal primers and 500 berger vld hunting 130gr. Can anyone recommend a min and max load with reloader 17 and 22? Ive got a large supply of them both, so i would like to try and use it. I'm open to other powders, If...

I think I have asked this question before but couldnt find it using the search. I have been loading 67gr of rl22 behind a 120gr swift a frame for over a year and shot many of them in that time frame. It makes a 3 shot group under a half inch @ 100 yards. While going back through my notes I...

Simply put my manual (speer #14) states the use of magnum primers. I have 16 lbs of H335 powder and 10,000 cci 400 sr primers. If im only loading the minamal charge of 24gr can I get away with not loading a magnum primer?

To start all my reloading data and supply's have been put in storage do to my wife having a little one. Short and sweet, I'm wanting to duplicate the factory 55gr fmj 223 Remington loads of any brand. Can y'all give me a a powder brand and charge weights, along with the primers recommend. Thanks!

Im looking to order a flat top gas block for my M&P MOE edition AR, But I am unsure on what size to get. There are several different diameter ranging from .625, .750, and .936. I would assume that it has the .750 barrel. Would like to order this gas block before they end up being hard to get...

I figured I would make a 2012 version for everyone to enjoy. Deer season starts at the end of this month for Texas. I will update with dome pics this evening to get this thread rolling. Does everyone have a deer in Target for this season?

I am going to buy a Ruger M77 in one of these two rounds. I'm unsure on which to get. What are your thoughts on these two? I Reload so not concerned about price of ammo. It will be used for everything from bobcats to mule deer, and everything in between. Ranges from 50 to 500 yards. Will most...

I'm looking to purchase a new Semi-long range rifle. Out to 500-700 yards on paper. I mainly want to know of a good cal to start looking at, as i really like the Remington 700 Action (But im open to other options). I do reload so ammo cost is no problem. I started looking at the standard stuff...

Used my last buck tag on this good 10 point. Not sure on weight. But a rough gross score of 163 7/8 makes him the biggest this year.

I just purchased my wife a ruger hawkeye in 257 Roberts. I already load for 257 weatherby and 25 wssm. Seeing how I have a lot of 120gr swift a-frames and 100gr tsx. I would like to work a load using one of the two bullets, and RL-22 as I have over ten lbs. Would any of you have a load for one...