Search results

  1. I

    Media sticking to my cases

    In the old days I would re-size rifle cases then remove the lube from each case by hand. Then I read how people would throw the cases in their tumbler to remove the lube. I tried this and now I have 100 223 cases that have corn cob media stuck to them. I use Imperial sizing wax as my lube...
  2. I

    Berry's MFG Rifle Bullets

    Anyone have experience with them? Specifically .224.
  3. I

    RCBS Uniflow

    I have an older one (10-15 years old). Have used mostly for rifle loads and some magnum pistol. Does anyone have experience with the Uniflow and small charges of pistol powder? Specifically 3 grains of Bullseye. Is it worth it to fool with Uniflow for that charge weight or should I just...
  4. I

    Ed's Red and nickel finish

    I have been toying with the idea of making some Ed's Red. Is it safe on a nickel finish? I found out the hard way that certain cleaning products will damage nickel plating. Just curious about Ed's Red.
  5. I

    Boyd's JRS Stock

    Anyone have experience with this stock? Pros? Cons?
  6. I

    Model 700 action lengths

    Probably a stupid question, but here we go anyway. How many model 700 action lengths are there? I know 2 for sure. Short action: 308 Win cartridge length Long action: 30-06 cartridge length Is there also a magnum length action for the 375 H&H based mags and the Ultra mag series?
  7. I

    Question for LEO's

    I just had a disconcerting conversation with a LEO from a smaller city department. He told me the only time he prctices with any of his 3 duty weapons is during his annual qualification. He said every once in a while his sergant will grab some department ammo and take someone to the range...
  8. I

    Single Six Problems

    I have an Old Model Ruger Single Six. I have been told by someone more knowledgeable than myself that it has had the transfer bar saftey retrofit done. (Gun was bought used.) I am having 2 issues with it. A) The base pin works its way out. Whether I am working the action (not dry fireing)...
  9. I

    Powder Handling: Dillon vs. Hornady

    For powders such as Red Dot, Unique and Herco which progressive machine's powder measure is more suitable?
  10. I

    ? for Hornady Lock N load AP users

    I have read that using a crimp dies other than Hornady can cause a problem. What brand crimp dies are you using? I would like to use either a Lee Factory Crimp die or a Redding Profile crimp die. Heck I would even put a Dillon crimp die in there if it meant I didn't have to machine a die to...
  11. I

    Hornady One Shot Vs. Dillon Case Lube

    I have been reloading metallic cartridges for about 15 years. I started out using an RCBS lube pad and lube. Then I graduated to Imperial Sizing Die Wax which I like a lot. What can become tedious is lubing each individual case and then cleaning each case off before proceeding with the...
Top