Search results

when you guys are working up a new load, at what distances are you doing it at, i usally do mine at 100 yards, just curious about what other people do!

Im running a RCBS Rock chucker press, im using RCBS dies and also Redding Premium dies. My problem is when i get to my seating depth and lock it down its fine for a few rounds and then i have to readjust it, happens with the RCBS dies and redding dies and on multiple calibers.

I just purchased a 280 AI with a 26" Barrel and a 1:8 twist, i have never loaded for this caliber before, i can not find any factory ammo for break in, Only bullets i have at the moment is 150 grn partitions, i have some 162 grn ELDX en route, 7mm bullets are hard to find at the moment...

Will be adding a new rifle to my collection this year, already decided on a Browning Xbolt Speed Ovix, I am thinking 280 Ackley Improved for a couple of reasons, #1 ballistically its real close to the 7mm Mag, #2 Can fire form 280 Rem brass if needed, and not real recoil heavy #3 I will be...

Does anyone load the 143 grn ELDX in 6.5 Creedmoore, I can not get any H4350 so im stuck with what i have, I was trying some 129 grn and this rifle just hates them, so i am going to try some 143 grn ELDX. Been looking around and some people seem to have some decent luck with IMR 4350 which i...

My son picked up a 6.5 CM 22" Barrel with a 1:10 twist, i will be loading this up for hunting, I'm thinking a 140 grn in Partion or Gameking. Since this is a new caliber for me i was just wondering what you 6.5 guys like in powders and anything specific i need to look out for. Thanks

Working on new load for my new rifle, XBolt hunter in 270 WSM with a Leupold VX 5HD 3-15x44 CDS-ZL2 fired dot. 140 gr Sierra Gameking, CCI LRM, 63 gr RL-19 OAL 2.70 Hornady brass, my chrono didn’t catch the FPS but should be in the mid 3100 range.

I know this is a long shot but here its goes, anyone got any 308 dies they can part with or know where i might can find some lol.

Getting ready to load 270 WSM, my question is about primers some load data is for Magnum primers and some is for Large Rifle using same powders just different manuals. Ask my dad and his only thought would be for ball type or short grain powders maybe use the Magnum because of the load density...

Looking for a new rifle, this will be my primary hunting rifle as i just gave my old one to my son. I have been looking at the Bergara B-14 series in 7mm Rem Mag and the Tikka3x Hunter. I am not interested in an entry level rifle, i prefer wood over synthetic as this will be handed down to my...

looking for a good case trimmer, whats a good one? What do you guys use?

I have been using my Dads loading setup because i have never had the space at my house, well i do now. He uses a rcbs he bought some 30 years ago, well im going to purchase my own now and I am also looking at a RCBS Rock Chucker kit, I notice they have a new press called a Rebel and was...

Loading for a 7mm-08 which is new Caliber for me, new rifle with a 1:9 1/2 twist 20inch barrel. Loaded 140gn Accubonds with 46gn of IMR 4350 groups are consistent but tightest group is 1 inch, trying to figure out do i want to play with the powder load, seating depth , or bullet weight . I could...

Trying to decide on a bullet to use in my 7mm-08, considering either Nosler Accubonds or Hornady Interbonds. My dilemma is i want a bullet for deer that is going to expand well at ranges from 40 out to 300 yards, but also tough enough to hold together on these thick hide big ole hogs we got...

I just bought a Browning BLR in 7mm-08, never loaded for an 7mm-08 been loading for my Savage 25-06 for several years. I will be using ether a 140 grain Nosler Partition or a 139 grain Hornady interbond. I have an abundace of IMR 4350 which is what i use in my 25-06 on a 120 grain Hornady hollow...