Search results

CAUTION: The following post (or a page linked to) includes or discusses loading data not covered by currently published sources of tested data for this cartridge (QuickLOAD or Gordon's Reloading Tool data is not professionally tested). USE AT YOUR OWN RISK. Neither the writer, The Firing Line...

Hey, I'd like to bring the weight of my trigger down to 2lbs, but I can't get that low. I can back that screw way out and get it down to 3lbs, but then the screw comes out. Can I do anything else to get the weight down to 2lbs? Or should I just order a Timney and put that in there? Thanks...

Hey, I’ve had an original P365 for several years. It’s always been great, but wanted something with a bit larger grip. Finally discovered the Wilson Combat grip modules and ordered one. It’s great. But, after removing the FCU (fire control unit) from the original grip frame, I have some...

Hey guys, I have a Kimber 84L that's a very nice rifle... I just can't get it to shoot. So, I'm thinking about a rebarrel and figured I'd go with 6.5x284. Here are the questions for those of you who have customized a long action 84 Classic: 1. Should I go with a slightly heavier barrel...

Hey, Have you all noticed a pattern concerning which brand/model of bolt action rifle has the least perceived recoil? For example, I feel like (I know this is subjective) my synthetic stocked Rem 700 in 30/06 kicked much harder than my friend's synthetic stocked X-Bolt in 30/06, even though...

Hey guys, Question for you. I'm considering buying an older gun chambered in 7mm Gibbs. Mostly buying it for the wonderful walnut stock. I have no interest in loading for the Gibbs... but a 35 Whelen would be great. I know the shoulder on the Gibbs is blown forward, about .2" longer than the...

Hey guys, I live in a state wherein suppressors are illegal, but I'm looking for a way to limit the noise and blast of my rifles as much as possible when hunting. It looks like the only option for me would be a linear comp. Here are my questions: 1. Does a compensator actually make an...

Hey guys, I've been loading for like 10 years and thought I had a good idea what I was doing... but I have a rifle that's causing unsolvable frustration. It's a Nosler Model 21 in 6.5 PRC and I don't know if the chamber is too tight on it or if there's another issue in my setup, but I'm...

After much deliberation, I decided to make the switch to copper bullets for my deer hunting and was able to take two deer with them this year. Was really pleased with the results and figured I'd pass it along. Cartridge: 308 Winchester Bullet: Cavity Back MKZ 125 Grain Velocity: 3200 fps at...

I know that many of you are more experienced than me, so I have a simple question for you: What big game would you NOT feel comfortable hunting with a 308 Win? I don’t want to influence anyone’s answer, so that’s all I’ll say. Thanks. Ps. Let’s assume you handload and can use any bullet you...

Every fall, I spend a considerable amount of time sitting in trees and trying to distract myself so I can ignore how cold I am. Recently, I posed myself the following question: If I could only own 10 guns to cover every single firearm-related need that I have, or could foresee having, what...

As an avid rifle shooter, I'm used to seeing at least 1-2 new rifle cartridges hitting the shelves every year. Bigger ones, smaller ones, faster ones, slower ones, fat ones, skinny ones, etc. It's nonstop. With that said, why don't we see new handgun cartridges popping up more often? I can't...

Hey, can anyone run some number for me quick for the two cartridges listed below. I’d love to know predicted velocity and pressure. They both shoot great and fit within safe ranges, would just like to know the numbers. 1. 6.5-06 105 grain CBB MKZ (all copper, like a Barnes TSX) 54 grains of...

Hey, My friend bought a 750XL and I'm helping him get it set up. After MANY hours of setup, we're finally making some 38 special plinking rounds. That said, we have two issues, both relating to primers: 1. About 10% of the time it's not removing the old primer. 90% of the time it works...

Hey guys, Just finished building a 6.5-06 but I'm having a hard time finding load data that I'm looking for. I swear Barnes used to have it, but it's not on their site anymore. Looking to use a 105 grain mono bullet (Cavity Back). Hodgdon lists H4350 as the fastest powder, but I don't have...

Hey guys, Getting ready to start working up whitetail loads for the 35 Remington and would like some feedback regarding the lead free bullet options out there. I've used monolithic copper bullets in higher velocity cartridges (2800+ fps) with good success, but am wondering if anyone has used...

Hey guys, Seriously considering purchasing a new rifle in 6.5 PRC. Looks like an easy way to get 6.5-06 or 6.5x284 level performance in a more "standardized" and easily available format without having to build something. With that said, my favorite .264 cal bullet is the 105 grain CBB (all...

Been stuck home sick and have been reading books by Jack O’Connor and Elmer Keith simultaneously. Enjoying both immensely for themselves, but really enjoying how differently the two of them viewed certain cartridges and their effectiveness at harvesting the same game. This will not surprise...

Hey guys. Took my Model 70 (308 Win) to the range to fire some of my hand loads and the cases are coming out looking unusually scuffed/marred around where the case would expand to fill the chamber. Not sure if you can tell in the attached photo, but it looks like a million little scratches all...

Hey guys, UPDATE: I ACTUALLY FIXED THIS ONE ON MY OWN. Mods, you can delete this. Thanks. I recently sent my Model 70 out to a custom stock maker to get a new fiberglass stock on it. The stock looks great, but there’s an issue with the bolt. Somehow I cannot get the bolt back into the gun...