Search results

These are all Buffalo Bore loads(from a 5" semi auto pistol barrel): 10MM 155gr TAC XP 1455fps 728ft lbs 180gr JHP 1350fps 728ft lbs 200gr FMJ 1244fps 687ft lbs 220gr HCFN 1200fps 703ft lbs 45 SUPER 185gr JHP 1330fps 726ft lbs 200gr JHP 1235fps 677ft lbs 230gr FMJ 1133fps 656ft lbs 230gr JHP...

I have a G21 and like many shooters, that I have read about, I experienced brass flying back into my face when shooting 45 ACP or 45 Super. I was doing a deep clean on my slide one day and I lost my spring loaded bearing. Rather than wait for the replacement parts I put the slide back...

I have a G21 and when it is stock and loaded with 230gr ball, it shoots perfectly. But when I shoot with my 45 Super or .460 Rowland set up, I get FTF's. It seems to be that the nose of the bullet gets hung on the feed ramp. I have started to suspect that the slide is moving too fast for the...

G21, LWD 6.61" 45TH, Wolff guide rod/22# recoil spring, LWD 45 Comp. The barrel/comp was just collecting dust so I broke out the Dremel and now I have: G21, LWD 5.25" 45 Super, Wolff guide rod/24# recoil spring, Buffalo Bore 185gr 45 Super JHP. This is my EDC. It wasn't as hard, to cut...

I am waiting for a LWD 5.2" 45TH to be re-chambered for .460 Rowland. I will be mounting an EFK Fire Dragon 45 comp to the barrel. I will have a Wolff guide rod and 24# recoil spring installed, and I am omitting the recoil buffer because Johnny Rowland said to.

I bought, from Buffalo Bore, some 45 super 185gr @ 1300fps, listed as JHP. And the pictures have been the same for quite a while now. They show the GDHP for all of thier 45 super JHP. What I recieved is something quite different! There is a statement at the end of each description that reads...

Well, I read this morning that Ace Custom 45's is hanging up at least one of his hats and I have read that Texas ammo went under. I hope this doesn't mean that the 45 Super is going to suffer for it. As I have just went "all in" with my G21 for 45 Super. I bought the LWD 6.61" threaded barrel...

I am just a little curious. I have read many discussions about semi-automatic weapons stove piping etc. I have experienced an M16 misfeeding because of the pitiful maintenance done on the mags that were loaded for us. But I can't recall any stories of a lever action jambing or having a feeding...

:D Got my 357 mag back from M&M Gunsmithing. Can't wait to try it out. BEFORE: AFTER:

I currently have a New Model Blackhawk 7.5" 45LC on layaway. I have since read a few articles about the Blackhawk and have determined that I should have purchased a Bisley model. I would like to know if it is feasible to install a Bisley grip on the standard Blackhawk. Has anybody attempted...

I just aquired an M711 in 357 magnum. I assume they were all 4", dunno. It turns out that Interarms stopped doing business and everything Interarms is now in the possesion of M&M Gunsmithing, mmgunsmithing.com, mmgunsmithing@yahoo.com, and Braztech Rossi has nothing to do with anything...