Search results

Does any one have any experience with the POF Rogue 308 Win. I recently purchased one. The rifle works fine a bit over gassed but it functions fine, my concern is the accuracy it's really bad. Has any one else had this issue.

This is a long story but will shorten it I received this rifle from a friend who has passed away. It is a pre 64 Winchester model 70 lightweight barrel as is the stock. the barrel is stamped 6.5 Parks Mag below that is K E Smith. I would guess he's the gunsmith that did the work. The empty cases...

I bought a Remington 700 260 Rem that has a fluted barrel / Badger muzzle brake/ Timney Calvin elite trigger about a month ago. This rifle likes absolutely nothing I feed it. The guy I got it from had a McMillan stock on it which he sold before I had a chance to buy it and told me it shot great...

I finally got my 6.5 under 1" today in fact it is right at 1/2" its a 18" BCA barrel, bullets are seated at 2.270 with 28.7 gr of 8208 123 gr Hornady SST CCI 41 primers and Hornady brass. Every thing up to this load was 1 1/2" or larger. There does not appear to be any excess pressure as I have...

I'am a little slow in getting into the 6.5 Cal market but finally got one in the 6.5 Grendel. The one I put together has a 1/8 twist 16" stainless steel barrel. I shot it today with factory 120 gr. and 123 gr loads. it seemed to favor the 120 gr. What I found was the magazine was very difficult...

Any one have experience with the T/C Venture rifle Good or bad. They seem to offer a lot of features for a low end rifle.

I posted this on another blog and recieved some feed back but nothing I have not tried so looking to see if any one here can help. I have a Savage model 16 in 243 Win. The rifle has accutrigger,accustock, etc. it's one of the top of the line rifles. Here's what I have tried in it Hornady Super...

I'm in the process of building an upper in 260 Rem and have a couple questions 1st what is a good twist rate for 120 to 140 gr bullets, this is for coyotes and hogs not long range target. Barrel length will be 18". 2nd who makes good barrels that won't break the bank?$250 to $400 range. This...

Any one have any experience with 52 gr bullets with IMR 4166 or Benchmark.

This has probably been beat to death before if so sorry. I'm looking a buying a night vision scope will be using it for varmints and hogs. Our gun club has night shoots also so I may do that too. I would like your feed back if possible on products, options and power. I have read and listen to...

I'm kinda new at the AR thing so I need your experience please. I have a PSA AR 10 which worked fine but it had a Magpul full stock on it. How ever it was very heavy so I had an adjustable stock installed. Today when I shot it would not extract the empty let me rephrase that, it tore the lip off...

Not sure if this should be in this forum or reloading but here goes. I have a PSA AR 10 it doubles on me not every time but often enough. I'm shooting LC brass with CCI 200 primers. I have been told CCI primers are very soft and that is the problem.( slam fires) Has any one experienced this or...

I have a question for you wheel gun experts, as I'm not :). I bought a S & W 586 with an adjustable front sight. It has a 6" barrel. I did find a bit of info a info on the web. Any and all info would be appreciated. Model number does not have a dash. Serial number is AJN7XXX. I think the front...

I went for years without liking or wanting a .308, guess I just didn't have a need or desire for the caliber. Well about 4 months ago I bought a Remington 700 heavy barrel stainless steel with an HS Precision stock. I bought it to get the scope off it 6 X24 Burris USA made. I did take the scope...

I have several 700 Remington rifles, I have BDLs, XCR II, SPSs, and VLSs. The ones I can't figure out have a Precision stock on them, pre adjustable trigger. The 223 has a fluted heavy barrel all blued, the 308 is stainless heavy barrel not fluted. Any one know what there called 700 ???

I bought a rifle to day with a Burris 6 X 24 signature which has a dial on the objective end that has a daylight / twilight setting on it. When I look in the objective end I see shudders in it so I under stand the concept but I can't turn the adjustment to make it open and close. My question is...

I have been on the look out for some time (about 4 years) for a 260 Remington. I found one today its a 700 Remington SPS looks like new and previous owner said he didn't shoot 2 boxes of shells through it. I'm looking forward to working with it. My question is it has stamped on the barrel 1 in...

I traded for a CZ 527 Varmint in 223 Rem. it has proven to be very accurate and a joy to work up loads with. Here's my question the other day a guy at the range told me the CZs aren't a very strong action. I have looked on the web for any info on this and have not found any thing to confirm...

Has any one out there tried CFE 223 in their 22-250. Just wondering if you had any success with this combo. I have a lot of 52 gr / 53 gr and 55 gr Sierra bullets as well as CFE 223 powder.

I am just wondering if any one else has had any problems with their Sig Mosquito. I had one and it jammed it didn't make any difference what ammo I would run through it so I sold it. I really like the feel of the gun it just seems to fit and point right for me. Today I bought another one Desert...