Search results

Picked up a sweet old Smith wheel gun for a song. But need help it looks like a Victory Model, in .38 S&W but no V in the serial # its marked "D^D vega SAC CA" on the left side of the frame. Can anyone tell me what I have and the value at a true 95% Thanks for any help you can give.

Moving out west(Tucson)and my 12 girl wants to go on a javalina hunt with me next year. Her white-tail gun is a Marlin 1894CS it works great on deer back here. I know they are small animals, but this is her first hunt with a prey that has bigger teeth than she does. Is it enough gun or do we...

After getting home from work, in instead of clearing my 1911 I will just leave the gun in the IWB holster and put it in the gun safe. Is this hard on the main spring ? How long can I should I be able to leave it like this with no undue wear? I shoot once a week with my carry gun, so its never...

I have been thinking about getting a FEG or some other type of Browning clone and have been wondering if the parts made for the Hi-Power will fit these off shoots? Thanks for any help you can give.

I have had several dot sights on handguns like my Ruger Bisley, as well as pistol cal. rifles like my Ruger .44 carbine but how well will they hold up on my FAL or my .308 scout rifle? I'm not talking about a $40 BSA, all I use is the Tasco PDP3 Propoint. If they will hold up to the .308 I dont...

A while before the site crashed I got my first FAL, and while I really do like the gun, I would love to make the barrel a bit shorter as well a have break installed. Wilson has an ATF approved break for post ban ARs but is there anyone out there doing it for FALs?

I just got a FAL from CAI on a IMBEL receiver and while I'm impressed with the rifle for the most part I would like to do something with the trigger, can anyone give me a source for tech. info as an at home project or do you all think that I'm better off taking it to my gunsmith ? Thanks...

I'm going to start coyote hunting soon and it seems that I can get surplus .223 cheaper than I can handload 22-250. So has anyone out there had much luck with the military stuff? I'm not looking for dime size groups or anything, min. of coyote out to 200yrds is all I'm looking for.

Sorry no Pic but I have found a .32 acp with Nazi markings, it's an SA and on the slide is "P.mod 37, KAL 7.65" and on the frame is "JHV 43 54XXX" I don't know to much about guns of this era and would love to know a little more about it, or if anyone could give me a web site that I could look...

I work part-time at the local Stop-n-Rob and I had two gang-looking types come in and and take 15 mins. to get a 12 pack(they came to the counter after the last guy walked out) when I gave the first one his total, thug number two steped back about five feet when # 1 put his hand in his coat...

My wife found and fell in love with a stainless Ultra Carry and put it on layaway today. And I would like to hear some of the opinions out there about this gun. I already have a Kimber full size 1911 and just love it. But as you can see from the name there is no point in saying get a Glock or...

The post that I saw today has got me thinking. You see for some time now, my point of impact on all my iron sighted handguns have changed, I mean the same guns and loads that I have been shooting for years. Does anyone think that an eye Dr. could fix my RX for shooting? If you have had this done...

For years I have used +p 158gr swc-hps for my S&W mod. 36. Now I really don't keep up with loads for the .38 but 15 years ago this load was rated the best you could get. But how about some of the new stuff out there? Any one have some thing new that will top it?

I already own a RB with a 7 1/2" and a Tasco Pro point and it's great for deer hunting but I would love to have one in 4 5/8". Will Ruger sell me a barrel or will I need to have my gunsmith cut one down and re sight it? I went to Rugers web site and they have no contact information. Thanks for...

A member said that he has a M77 in 7.62x39! I went to the Ruger web site and they didn't list one:( Was this a limited run for this round? And if so does anyone know where I can find one? I think that it would be a great first deer gun for my 11y/o girl. Thanks for any help you all can give...

I bought a 10-22 some months back for plinking and squirrel hunting, you know I had forgotten how much fun a .22 can be! After the Marine Corps my interest in guns went more towards fighting guns. It's nice to come back to my roots. My question is,can anyone give me some advice on after-market...

I'm looking for goast ring sights for my Defender but all that I have found are for the 870:( With all the defenders out there you think someone would make goast ring rear sights for them. Thanks for any help you all can give.

I saw it in there web site and heared a lot of talk, but has anyone out there gotten thier hands on one? If they are as good as the original for $ 590 how could you go wrong? And if some one knows a stocking dealer in SW Missouri that would be a big help.:confused:

Has anyone tried the Mech Tech 1911 kit from the adds it seems like a neat little set up but I have not personly known anyone who owns one. Thanks for any input you all can give. Stay safe.

I have been out of buying guns for some time now and I don't have a blue book anymore. Could anyone let know if there is a blue book online? And as far as the P-85, what is it worth at 90% with two pre-bans. All my Ruger wheel guns and rifles have been worth every dime spent on them. Does the...