Search results

Ok, I've been usen HP-38 and HS-6 for my 9mm load, I've moved up to 124gr bullets and was wondering what would be the best powder choice for accuracy. I pretty much have access to just bout any powder I want. I liek Hogdgdon cause it meters so well. As a side Question, also what would be a...

Ok, just curious of opinions here, I can get 2000 plated FN bullets for about the same price as 3000 LFN bullets in 124gn 9mm. Only down side to the lead of course is theres a little bit more cleaning required but no big deal, just minimal effort, So with that being said which route would you...

I've looked and looked and can not find this head stamp anywhere, its nicee looking brass that has " AMMOLOAD 9mm " on it. I have searched the headstamp data base anf its not there so guessign its soem sorta private label?

Ok, my lead 147gr fn bullets showed up finally. Tested some loads settled in on 3.6 gr or HP38, loaded up a bunch hopen to use them in a steel plate shoot. Went to the range to pump a few threw to double check everything. When I tested the loads I was shooting slow and checking for accuracy...

So heres all my 9mm once fired brass , sorted by headstamp and cleaned

Ok, I did a quick clean on my pro 1000, and now the case "sensor" doesn't move enough to release the primer. There doesn't seem to be any kind of adjustment for this system? Anyone else run into this issue before? I am loading 9mm at present and have run nearly 2000 round threw without this...

I'm sure this isnt a new question but, I have a few round that I need to pull apart due errors on my part , plus a few misfeds. Can I just run the the emptied brass threw my deprimer to take the unspent primer out? I also have one that the primer is in upside down,will depriming it set off the...

Ok, I'm fairly new to reloading. I am mainly going to load pistol calibers, for the mos part 9mm(mostly), 40 S&W, and some .45 ACP. I have a fair supple of both HP38 and Titegroup from hodgdon(could get some HS6 as well so far these have metered very well from my Lee press). I have the Lee...

Hello all, I am fairly new to all this basically self taught(which means I've read and watchen about 1000 hours worth of vidoes and articles. I have teh Lyman 49th edition. and teh lee data sheets plus hodgdon data, but have a problem finden load data on plated bullets both 115gr 9mm and...