Search results

Does anyone know which year Savage started chambering the model99 in .308 Winchester ? Thanks

Will the 4th and 5th generation magazines work and function in a first generation Glock 17 ? 9mm. Thanks

Some old ammo , if stored correctly , can still be fired safely. Some not. So what is the oldest ammo you have fired ? For me it would be 1935 headstamp Turkish 8mm. It was hot stuff but very accurate out of my Turk Mauser.

I pulled my KM77VT out of the safe today and hit the range. Have not fired it in a year or so. Its chambered in 22-250. I was using 55gr HPBT's. I cant remember the load but used H4350 powder. It will do 1/2" and better easily if I do my part. I gota break it out more often. Sweet trigger too ...

Could someone tell me what the barrel spin is on a 187 series Mini 14 ranch?

If you load your own loads for 45/70 marlin guide gun you know you can do better than factory ammo. But more power also brings more recoil. I had received my 1st case of scope eye with a standard scope on the GS when I got too close and the recoil monster bit me. Not wanting a repeat of that...

I own several rifles with muzzle brakes. The volume of the crack/boom varies with the caliber. An AR I have that is braked is pretty loud. But my 300 W/M Browning BAR is my king of loud. It has the BOSS brake/tuner on it. When I fire it at the range I notice all on the line are looking at me...

Is there a site that will give the made on date for springfield M1a's ?

I have a Trijicon ACOG TAO1 that I purchaced in 1999. The tritium has lost most of its glow. I understand one can send them in to be re-piped. Has anyone sent one in to have this done and what was the cost incured. Thanks

I picked up a couple of small bubble levels the other day. Today I checked five scoped rifles to see if the cross hairs were level. Only one of the five was close and the others were off a little more. They all LOOKED to be level. If the longest shot you make is 40 yds during deer season exactly...

A guy was at the bench next to me at the range. He had what looked like one of the cheaper M4 cloneoids. The thing that made me chuckle was that he had not one space on that carbine to mount another accessory. You name it and he most likely had it clamped on there. I did not look too close but I...

Eventually my 700 will be getting a Timney trigger but for now I need to get better pull out of the X-Mark stock trigger it came with. No matter how much I adjust the set/adjuster screw I cannot get it below 4 pounds. Has anyone found a way or another type adjustment to better the pull weight ...

I would like opinions on the Para Warthog from the people that own them or have fired them. I was looking at one of the new stainless ones. Its much nicer looking than the blued version and has a steel frame. Is that short grip hard to hang onto? Accurate ? I have heard Remington is going to...

I just received two Magazines for my Hi Point 995 that I have owned since 2001. Did they make a design change on the mags to go with the new stock? These look a little different than my early mags but they do fit. I have not used them yet. I was thinking maybe they sent me 9mm pictol mags which...

I pulled the trigger on my LCP to fire another round and nothing happened. That was cuz the slide was laying on the ground 6 feet in front of me ! The take down pin had walked out and the last round blew the slide off. No damage and I have a spare pin. BUT I was ******. I wish there was an...

After reading about it in the last issue of American Rifleman I went to my favorite LGS to see if they had a SR45. They did , a brushed stainless one , and I purchaced it. Its very well thought out. We went to the range this morning. Firing my 230 gr FMJ hand loads I found this is one accurate...

In a moment of stupid I paid a lot of money for a 27 round KMI magazine for my Glock 21. At the range this morning EVERY time I pulled the trigger the mag dropped into the snow. I have read that some when dropped on a harder surface will pop open and sproing the ammo all over. I guess some of...

I received a sweet deal on a new marlin xt-22. And I have just spent the last hour searching the web for extra 7 round mags for it. I found none available. One site said model 925 mags would fit also. Anyone know who might have them in stock ? Thanks

I have been thinking of dropping a Lightning Strike trigger in my G21. Does anyone have any feed back on them ?

So what is the scoop on the Korean KCI Glock Mags ? They are a bit cheaper than the factory mags. Any one use em - how do they work for you ?