Search results

Anyone know where to get these conversions and brass? Both my brothers want conversions. One for XD and the other for a Glock. Both have tried to contact the 460 Rowland site and received to answer to calls and email.

So I got a P226 in 357 Sig and bought the Lee dies. I did not have any issues with resizing with the Lee die. I made a dummy round, okay I messed up the first one, but the 2nd one seated just fine. I noticed you have to be very particular on the flare die. Once I got the right amount of flare...

I want to replace the white front bead with something similar to the Browning Citori fibre optic. Anyone know the bead size for the SX3? Any recomendations for a green fibre optic?

I had my Parker Hale 1200 rebarreled with Shilen replacement barrel. The gunsmiths parkerized the steel and spray painted the aluminum. I added the Talley split rings and mounts. Shoots better than expected.

Does anyone have the VV book? Does it contain load data for the 220's? Thanks!

Some moisture got in the gun case and rusted out the end of my Parker Hale 1200 7mm mag. This gun is 1969 model and is my deer gun. I cleaned off the rust, but the blueing is gone. I need to hunt one more season with it and am not sure if I want to restore this gun or go with a new one. Is...

I left some Power Pistol in the chargemaster and it is now stuck pretty well in the inside of the chargemaster. Anyone know how to get this clean?

http://www.ktvz.com/news/23772491/detail.html

I starting to work on these loads now. Mostly looking at R19 and R22 loads... Norma has 61.7 of 204 for 3288fps as MAX. 204 is between R19 and R22 in speed(brisance???). Alliant has 66gr of R22 at 3228fps, and 66gr R19 for 3088fps MAX. Win brass and CCI 200 primer Nosler says 65gr of R22 in...

Hornady site didn't have any load info for this caliber. Anyone have any load data? I have W231, Power Pistol and H110. This is for the FTX bullet.

Nephew has a P22 with the weight on front with 2 screws. He said they keep coming loose. He lives in Anchorage. Anyone know a smith? or should he send it back to Walther?

I picked this rest up locally. I did a google and could not come up with any information on it. It is a "Twin Rest" bench rest. I've attached a picture of it. Does anyone know what the bar is for? I want to put a owl ear bag on it. Any ideas on how to keep the bag from moving around? I might...

Okay, I have no Geiselle trigger or March scope but my 69gr SMK and 75BTHP are working pretty good. I picked up the rest locally for 20$ in excellent condition. Adjustment is smooth for the price I paid. I figure this is a great place to start.

What size drill bit for cleaning/uniforming the small and large primer pockets?

Hornady said something about trimming .010 off of SAMMI length for the FTX bullet because of ogive design of the FTX bullet. I am using Lee trimmer, which is not adjustable. I have the following powders: Varget, R-15, IMR 3031, IMR 4064, AA2230. Hornady has webpage and lists 29.8gr of R-15 for...

I cleaned out my Lyman 1200 last night and there is hardened gunk in it. Anyone know how to clean this stuff out without destroying the tumbler?

I made some 162gr Interlocks with 68gr R25 which my load data gave ~3000fps. This was a max load in one of my resources, but 70gr was a max in another source. When I tested these loads, I was getting 2750fps average for 3 shots. My barrel is 26in 1:9.5 twist barrel. The velocities of these...

Looking for a bolt action 22 s/l/lr. Used is good. Eventual collector would be nice.

I gave in to temptation and ordered a Chargemaster. Tired of dealing with trickle and my Lee Perfect Powder. R15 has really acted up and Varget is not much better. And I can forget running IMR powder in it. Chargemaster should let me throw anything I hope. And I can experiment more with small...

I see 168gr is recommended for 1:10 twist and 180gr is recommended for 1:9 twist. Well 7mm magnum is 1:9.5 twist normally, and mine is 1:9.5 twist. What size to ya'll recommend?