Search results

Found a great deal on a p09 free shipping for 467$. Went to a ffl to get a transfer fee. Of which I used this ffl once before and it was 30$ for a Remington 700 action. Now it's 50$ Have times just changed or is this a little high to some?

So i've held a 75 and dry fired one. Never actually fired one but it was one of the most comfortable handguns i've ever held next to a high power. Usually i hate DA/SA pulls. Our SW 6906 as well as the SIGs i've held and fired i can't stand. It's not the double action that's the problem. It's...

So i have yet to hold a full size CZ 75. I did hold a compact version which fit my medium sized hands very very well, though it was a little undersized. Also held a full size BHP and it might be the most comfortable handgun i've held to date. More so than a 1911 or an M&P of which i both love...

Well after my last outing with too hot rounds wasn't too good coupled with the fact i had a POI shift on my zero that i adjusted for, i was getting a little worried i was losing it :o The Rifle & Me Just the rifle GAP Milling reticle at 17x viewing a full size IPSC at 500yds Results Anyhow...

I'm on my fourth or fifth firing of my nosler brass and have a match a week from Saturday. I haven't annealed been reading about it and want to start but at the moment i don't think i'll be able to before the match. I need to load and get DOPE by this Saturday then i have to head back to start...

Since we don't really have an optics section and this is going on a bolt rifle i figured i'd share my initial impression of this scope. Picked up a Mark 6 3-18x44mm at a phenomenal price that i couldn't resist. It's Mil/Mil, locking turrets, zero stop, 34mm main tube, has a TMR reticle, and...

Well here's the load data for my .308, and i'm unsure why my zero has shifted 1/2 a mil high for the POI. Hornady 178gr BTHP match Nosler brass 45gr of varget fed 210m COL: 2.865 The optics is a U.S. Optics SN-3, i've had it almost five years now and never had a problem with it shifting zero...

Currently my setup is my 700 5R bedded in a MCM A5, with APA RTG, and bolt knob. With my handloads it really is a great shooter. That said this is my main rifle and i want to rebarrel to 6.5 CM. I also want a shorty .308, as a semi truck gun and dedicated medium range hunting rig. So i picked up...

Here's the load 45.5gr Varget Nosler Brass Hornady 178Gr BTHP Fed 210m Primers COL 2.860 So when i grouped these in low temps the best group i got was 45.5, which i accidently loaded from the get go (max is 45.2gr). That said i saw no pressure signs at the time or maybe i wrote down 45.5 when...

Well i've been hunting hard for about three weeks for a 140ish class 8-point at one of our spots. He goes out the first time since his heart cath (no blockage whatsoever :)) 15 minutes before dark and bags this. Now honestly i might have passed him up, let him grow some. Though he is a nice size...

Was installing the brake and it stops on the crush washer with a full rotation and a fourth of a turn left. Ops Inc's max specs are no more than 450 degrees torque (i assume that would be approaching) but recommends 90 degrees (1/4th a turn). Problem is with the crush washer it lines up like...

So I've deer hunted all my life but not as serious as this. I've killed small decent bucks plenty of does. For the first time I want a high class deer so to speak a nice 140ish mature buck. I've been hunting one of our secluded bean fields that butts up to 8000 acres of CRP. We have three bucks...

How's everyone's performance with these? Were shooting 105gr hunting VLDs @ 2700fps out of our youth model .243. Dad and I both have shot two does in the past couple of days. Found the one i shot the night i shot it and his that he shot the day before the same night. His was shot at 300yds mine...

Finally making progress on the build, got the APA bolt knob and RTG added. I highly recommend Jered and the crew at APA. They're great people to deal with and offer great services First time i had ever sent my rifle off it all went very smooth. Here are some pictures, couldn't get any proper...

Running 105gr Hunting VLDs over 40gr of IMR 4350 in our youth model 18.5" .243 @ 2700fps. Makes a hell of a 600yd hunting rig ;). Anyhow just got around to loading again, we initially zeroed in 50F weather, at the end of last winter. Shot in 80F and my initial shot at 100yds was spot on, but a...

This was supposed to be done two weeks ago but i left it at home (school started) and my parents couldn't get a big enough box to fit my storm case, and there wasn't a UPS location around home that we could send it through. So i brought it back to starkville with me, being there is a UPS...

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=302266529 Everything seems ok assuming a competent smith worked on it. The slide fast fire system would shy me away from it, i'm not wild about it. IDK, price isn't bad for a loaded model, with a little work done to it. here's the...

Just saw that Tyler posted this. Its by far the most accurate 7.62 AR i've seen. Gotta get one. Though Tyler is an excellent shot and it's almost always the indian over the arrow, it's extremely impressive to see it do that. http://www.youtube.com/watch?v=UxGmusWYATE&feature=g-u-u

Just curious about the 75s, i have a friend that runs one in production uspsa. I've never handled one but read/heard the grip is like that of a 1911, in that it is just a very good feeling gun. Also how's the double/single action trigger pull? I have one handgun that's Double/single (SW 6906)...

Started shooting three weeks ago, with my M&P 40 and got a fobus mag pouch to hold me over but, the mags aren't spaced properly enough to get a full grip on them. My index finger only grips the vertical length of the mag about halfway. This causes the top end to not be as steady and it causes me...