Search results

picked up my very first revolver, a taurus in .44 mag , most ppl know im really good with rifles and even some handguns but this surprised the heck out of me 100 yards shooting 180g pmc jhp's

any major issues or complaints? ive been looking for a new project and i think ive found it. what im thinking is a 26" barrel with 1-9T +2 gas that i could swap out with my 6.5 creed barrel since i dont shoot the creedmoor anyways and id have to enlage the ejection port on my upper along...

so i spoke with mcgowen and they will do another 28" in barrel for me this time its going to be in 6mm arc im going to go the same is ai did with my grendel 28" +2 gas straight taper to .936 at the muzzle/ i have yet to decide on twist rate but i belive im going to go with 1-7 or 1-7.5 lead...

theese rounds and this barrel never cease to amaze me weather conditions 91* 11% humidity and 10mph wind cartridge = 6.5 Grendel Starline nickle plated brass cci #450 primers powder = alliant power pro varmint mv = 2980 fps Range - 204 yards target dot = .750 single digit es/sd top dot =...

did some range testing today with my Sig p365xl VS my Sprinfield Hellcat , targets are 6 inch pasters @ 25y shot rapid fire . the 365xl deffinatly more controllable though i have alot more time/rounds downrange with the sig then i do the hellcat , given some more time with the hell cat i think...

since some parts are starting to come in figured id post the next build doing this one on a polymer lower , no billet upper this time going to be a monster 12 6 arc build , with a 12inch hq and kaw valleycomp , low mass bcg , 2.5# drop in trigger still not sure what brace is going to go on this...

in my hands its an form1 sbr but im gifting this to somone so i put it on another lower with a pistol brace. im going to build another identical upper for me to keep as the sbr i was just waiting on the results from my range testing. first up out of the box hitting steel at range with a 4x...

i love my 6.5 grendel/creedmoor but i wanted to try out a 6 arc for varminting and coyotes so i grabbed a 20 inch 65 arms 6 arc barrel , ive got this mated to a km billet gen 2 upper with a km 17 inch hg , rtb bcg with an aa bolt, for the moment im going to put this on my lower i have on my 28...

first up is the 123 eld-m over 28g of ar-comp at 500y next up is the 135g a-tip over 28.5 g of ppv ( need to dbl check my log book on that one ) 1 7rd and one 3rd group next step 1000y and then out in 200y increments

they multiplied now i have a baby gren 6.5 grendel 10.5 hbar pistol gas 1-8t sba4

Did some upgrades today swapped from my 15" in hg to a 17.5 lapped the upper and bedded the barrel in the receiver we'll see if it helps accuracy at all .as accurate as this gun already was I'm not sure I'll see much of any improvement but I deff like the look with the new longer hg

specs so far custom 1-8T 28inch stainless hbar +2 gas system .936 at the gas block (McGowen barrel) threaded 5/8-24 titan brake/qd adapter for the 7 inch titanium can 20inch slim mlok handguard .936 micro gas block NBS Slick side rear charging billet reciver Nightforce nxs 5.5-22 X 56 scope Luth...

Decided to try theese out in the gren and see how the compare to the nosler 130g rdf Loaded my first 3 at 28.2 g of ppv Deff the most expensive rounds I've loaded for this gun lol

finally getting around to working on my ar-10 6.5 creedmoor ive had some cycling issues with it along with piecing primers. ive got the pierced primer issue solved turns out the bulk bullets i had bought were actually over sized by a lil bit and causing issues ive since switched to hornady...

video here https://www.youtube.com/watch?v=hcBOKegB83s

So far really liking it only a half box of ammo threw it so far. I must be getting sick though cause I got rid of my XD to pick up the xl n I normally don't get rid of guns lol

https://www.youtube.com/watch?v=32RofpxCcH4 have to upload the rest way over gassed with the can on the end need to take care of that

If this wind dies down I'm going to go for it tonight Calcs showing 2818 inches of drop at 2k 2k y is beyond my scopes ranging capabilities for this caliber so I'll have to set the max range and play with the bc numbers and velocity numbers till my scope displays the correct bullet drop Wind...

Loaded my first 5 at 28g ppv cci #400 hornaday brass 2.255 oal 130g left n middle vs 140g hornaday match hpbt right chrono gave meError 3 on all 5 rounds brass looks great Going to move upto 28.3 g. And try again Only grabbed a pic after the first 2 rounds when I went to reset my crono but...

i had just finished working up a load with the 140g match hpbt's 28g of power pro varmint cci#400 hornaday brass oal 2.255 leaving my 20 inch barrel at 2400 fps i pulled that first shot right anyways i tried to make an attempt at 1760 today but a storm moved in right as i was setting up ...