Search results

Anyone have any load data for this combo in .44? I've found some data at a couple of websites but nothing published from manufacturers. Any info would be great. Thanks, Gary

Whoa, after spending much time and elbow grease cleaning the faces of my nickel 29 and GP100 cylinders, I found a product that wipes the face clean. Birchwood-Casey Lead Remover & Polishing Cloth. What a great product. FYI

I just purchased some Berry's 240 gr HPs. The bullets do not have a cannelure on them. My dies are for roll crimping. Do I need a taper crimp die to load these up, or will there be sufficient tension on the seat? I plan on using these in a Desert Eagle and a S&W 29. I'm aware of the...

I just inherited a Colt Challenger from my Father. :D For you Challenger owners, I have a simple question. After the last shot, is the slide supposed to remain open, or does it close? Thanks, Gary

I've decided to neck size my cases from here forward as I only am reloading for one rifle and the benefits of case life alone is enough reason for me. I currently have the RCBS 3 die set that has a FL sizer and am going to order a neck sizer. I'm looking for opinions as to whether or not...

Can someone educate as to why, when I'm shooting .44 lead out of my Model 29, it smokes way more than .44 Jacked out of my Desert Eagle. Same powder, as example Blue Dot, way more smoke out the end of the 29. I can't imagine what would cause this. Is it actually some lead that is...

Came across this...... http://www.sportsmansguide.com/net/cb/cb.aspx?a=423415&pn=4 Seems like an okay deal.

You posted this picture in one of the threads..... I'll assume this is your DE. How do you like the wood grips? Are they the ones you can order from MRI? They look great. Do they make holding the gun more difficult? Thanks, Gary

I recently ordered some of these.... http://www.pennbullets.com/44/44200rnfpbb.html I have not loaded .44 cast bullets before but have loaded jacketed for some time now. Can I load these using the very low end of jacketed data for the powder listed? I have an extensive list of powders that...

I have a ton of 44 mag cases and would like to save a few bucks by trimming some mag cases down to special length. Has anyone found a good way to trim or cut them down? Should I just break down and spend $35 for a couple hundred cases? Any ideas? Thanks in advance

Is anyone currently using one of these? http://www.midsouthshooterssupply.com/item.asp?sku=0000690107 Not the Auto Prime, this one sits on the press. I currently am using a Lyman Ram prime that works great, but its a little slow. Any feedback would be greatly appreciated. Thanks, Gary