Search results

Hi All, Found some surplus ammo and cases with the following headstamp and battle pack markings. Need some help in ID please. Battle Pack: 7.61x51mm, Ball, R1 M1, 045B05/81. Head stamp on cartridge: 7.61, B81, R1M1. Thanks for any and all help. ken

Hi All, just bought an AK47 56S-1 Norinco sight unseen. After returning from across the pond, I see that it is 99% but the front sight seems canted a few degrees to the left looking down the sights. I know this is not right, but how does one go about correcting it???? Not going to mess with...

Looking into a .50 cal, and ran across the new .416 Barrett trough a friend. Comments appreciated.

Well, after lots of reading posts, other stuff and talking to others in my area this is what I did. History: New rifle had void in barrel and was sent back, out of box for new barrel. Replaced without question. Received and cleaned initial cleaning. Not sure how many rounds factory put...

Well, decided to go for the "Tubb's Final Finish" fire lapping system for my 7mm Rem Mag. Results are that it moved my throat forward about .030 (as advertised) and removed all the throat errosion except for two very very small spots. Polished bore very nicely. It was very bad to start...

Any opinions or users of the Tubb's Final Finish product??? Can be used for any barrel they claim and is good for barrel breakin as well??

Got my new Savage 12 BVSS back from savage after my barrel problem. They put a new barrel on and back it came. Anyway, I have looked at the laminated stock and see that it is piller bedded. Any opinions on bedding the lug???

Bought a Savage 12BVSS in 22-250 this weekend. During the initial cleaning, I did not notice that there was any problem due to the fact that I was using a rather loose patch...17-22 cal. There is a Void or a place of excess clearance in the middle of the barrel. I can push a .224 patch...

I recently (this weekend) bought a Savage Model 12BVSS in 22-250. Got it home, cleaned it with some .17-22Cal patches (size important), mounted scope and commenced to shoot. After a couple of rounds, went to the store and bought some proper .224 patches. Passed the .224 patch (tight) with...

Anyone around loading for a .300 RUM?? Am shooting a Sako 75sssyn. Any good loads in mid bullet weights. Any barnes bullets loaded??

Has anyone owning one of these,917vs's, glass bedded the laminated stock. I know there is not much of any recoil, but while reassembling mine, I found that the barreled action kinda floats around in the stock quite a bit due to the round barrel/chamber/action design. I had to just move it back...

Took on board all of ya'lls advise, along with tales of knocking off marbles at 100 yds and am now a believer in it all. Just brought home a Marlin 917VS, mounting a Redfield Illuminator 6x20 that I had laying around, and shot some unbelievable fun groups......... and blew up a couple of cans...

Probably been this route before, but appreciate the feedback. Looking to buy a .17 HMR for the fun of it. What is a good gun, medium price range, for the bucks that shoots or can be made to shoot in a single, bolt repeater or single bolt?? Again, appreciate the feedback.