Search results

Meopta 1-4 new reticle ? I seen a clip on you tube about a new reticle for the 1-4 scope. The K-Dot works but has anybody seen the New reticle due to be out in March ? Thanks,Keith

Burris 1x FastFire II Red-Dot Reflex Sight is it visible at night ? Trijicon Red Dot Sight is it visible at night ? Looking for something to piggy back on top of a scope like they do on the ACOG. For the real close up shots, Thanks,Keith

Are there any know problems with the Aimpoint like the battery contact problems with the EOtech ? I can see how the Eotech would have a problem the AA battery is in a position to shift under recoil and over time cause a problem. I can see how the Aimpoint would not have the problem. The new...

If so how are you making your molds ? I love it I just need a way to make a cheap mold, Thanks,Keith

Where can I find the info on how to change the main spring, Thanks,Keith

Can you add a break or flash hider permanently to the barrel to make a pistol barrel over 16 inches and be within the law for a rifle ? Thanks,Keith

I have CIDP so my hands are not as strong as they should be and the pistol slips under recoil does anybody know if shooting gloves are legal for IDPA and ISPC ? I can hold it for 2 or 3 shoots before it slips but with gloves I can run the gun dry without a problem, Thanks,Keith

I never heard of them. Web Arms, 1305 Everglade, Pasadena, Tx. 77502 www.webarms.com It's only a good deal if they are real, Thanks,Keith

Weaver 1.5-4.5x 24 Classic Extreme 30mm Rifle Scope ? Are the clicks audible and does it track true ? I'm looking at it for an AR-15 6.8 SPC for Coyote hunting, Thanks,Keith

Where can I find data for the 45 ACP 175 LSWC ? I have a bunch of books none list the 175 lots on the 185. I'm thinking go about .3 less than the Unique load for the 185. I just like to go by a know source is why I'm asking. The date for the lead 185 195 and 200 seam to be real close with lead...

Does anybody make a small pistol primer that is plain brass ? I ran a bunch of max loads through my 357 SIG today and the firing pin channel got blocked by a small piece of nickle from a primer. Speer ran into the same problem and came up with the lazy s brass and went to a plain brass primer...

Will the Hornady 125 or is it 124 Hap bullets work for reloading the 357 SIG. If not does anybody know of a jacket bullet the will take high velocity and is still cheap enough to buy by the thousand, Thanks,Keith

If so how is there work. Were you happy with it, Thanks,Keith

I need it for a puma 92. I have been told the one for the Winchester 92 will fit. The only mount I can find is for the Puma 92 but it's made by B-square. Is it worth buying is it a mount that will hold its zero ? It is for a 454 Casull, Thanks,Keith

6.5 MPC ? Does anybody know how to make 6.5 MPC brass ? I think shorten the brass run a .264 sizer through the neck of a 223 then fire form it . I thought about the 6.5 Grendel but brass is to high to sling it all over the place with a AR-15. I have an AR-10A4 but its to heavy for all day use...

Will the red dot Ultradot hold up to the 308 or maybe the 223, Thanks,Keith

I blew a 40 S&W case head off with a 12 grain load of Long shot with a 135 Nosler. In P229 40 using a 3X or 4X fired case it blew the extractor and top of the right grip off. The case stayed in the gun but the head was gone. The more I look at the case that blew the case head off the more I...

I say chamber support not hot load I had a minor Kaboom with a 40 the load pushes a 135 JHP at 1482 fps. People said I was stupid for firing a max load in a case I did not know how many times it had been fired. Tops it had been fired 3 times .OK lets say there right . So I did this I took a...

I know the Bar-Sto has a tighter chamber than the sig barrel but does the Bar-Sto have more case support in the feed ramp area ? Thanks,Keith

Ok I soaked some american rifleman mags over night Then shot them with my 40 135 JHP load it went like this. No denim to start with. This load is out of a SIG P229 its smoking. 135 Nosler JHP at 1482 1st shot 76 grains dia .552 2nd shot 74 grains dia .663 3rd shot 77 grains .703 4th shot 76...