Do you know if Sig is still producing the 202? Also, I have yet to find anywhere online where one can purchase extra barrels for said rifle. Any ideas? love to hear it
Hello. I am wondering how much finish machining would be required on a commercial Mauser cast. I know a raw cast would need to be heat treated. My question is how close to spec is the average cast?
Also, would you cut the threads, true the inner receiver lugs and face, before or after the...
If I remove a barrel and put on a different OEM barrel, can I simply tighten it down to the go gauge or would you suspect I will need a chamber cutting tool?
There is a question in my mind as to if the 3 to 4 inch 100 yard groups could be do to the lack of adequate left recoil lug mating? Any smiths please chime in. The first pic, 326, is the left lug. The second, 327, is the right lug.
I am a little nervous I may have screwed something up. I glued with Devcon one of my action screws to the bottom metal while bedding my bolt action rifle.
I eventually had to drill out the screw head to remove the gun from the stock. In the process of trying to get that booger of a screw...
http://transsylvaniaphoenix.blogspot.com/2008/05/british-called-they-want-their-guns.html
So as to avoid a drive by, my commentary is this; let us not make the same mistake as the British. I think that would start with electing Obama who supports extreme gun restrictions. Have you all...
I noticed on the outside edge of the case mouth of my brass the imprint of the lands are present. Any thoughts. Can't imagine that the brass is long enough to touch the lands. The brass had been trimmed to length prior to use with a lee trimmer?
Minus all of the propaganda, have you all asked yourselves what we are really getting from the war in Iraq? Stability? Don't see it. Cheap oil? Don't see it.
The only argument that I have witnessed of seeming credibility is one that states, "if we pull out now, Iraq will be in shambles." And...
Snopes.com seems to think this picture is legitimate. Why would anyone think it is not important to honor our country with not putting their hand over their heart? Even if it is not intentional, it just shows me we (Barack and I) have come from totally different backgrounds. I was raised in...
Is there a downside to the shorter grip? In particular, if I got one I would carry it rarely, but it would be carried, but it would primarily be a home defense/plinkin gun. Debating whether the compact grip would be best choice?
On my bolt action rifles, when I remove the bolt and am trying to use the cleaning rod to clean the bore, solvent always finds it way onto the stock. I have tried towels, visqueen and other plastic pieces to catch the solvent drip. What do you all use?
I have a frame screw that is slotted. I have boogered up the screw and scratched my wife's table trying to loosen the darn thing. I can't get it loose. Any ideas? I have tugged, screamed, and to no avail. This is a new gun from the factory with floor plate screws so tight I could scream. I...