Search results

I am uploading 2 photos, one is starline nickel brass damage from sig P226 extractor. The other is the actual damage to the brass (nickel). I have reloaded federal, speer and others, seems the starline is the only one showing this. I have 4 or 5 sigs, they all seem to do this. Starline does not...

So sig just came our with the really neat take down lever. Used to rest your left hand thumb on. Already got one for my 320x5 looks and feels good. PROBLEM is the I bought 3 and they come with a new pin that goes through the trigger assembly. It's sticks out the opposite side lime 1/8 of an...

I have been de-capping,dry tumbling with crushed walnut my nickel and brass 9mm rounds. Then I use Ultrasonic cleaner for 1 hour with one shot 10-1 additive. While they seem clean, the brass spent cases are cleaner inside. The Nickel not so much. I tried to dry tumble the brass and they got...

I have 2 XL650 presses and consider myself proficient with these machines for 5 years. Today I helped my cousin set up his new 750 machine (9MM) Once we had it set up ( don't like the new primer system) once we had it setup we had a PROBLEM. Last thing was to load some brass. Put about 75...

My SAO sig 226 legion has a great trigger, just right for my old hands. However, my other sigs like the P226 , the trigger has a lot of slack and my old fingers are not comfortable pulling. I tried a few triggers and they all still have the slack. Any way to limit that travel, never use this...

I have had my P210a for almost a year, fired some 5,000 rounds. Sees the slide has difficulty going to full battery. I must really snap the slide quickly. I thought the pistol needed to break in, but is seems worse. My friend bought one around the same time, his is much better and hardly has...

I have not fired my Sig P220 in a year. Using 200g berrys with 4.0 bullseye. Nice groups at 50 feet. But the muzzle flash is like 3 time what my other 9mm sigs do. I just don't remember this much. I inspected the gun, seems ok. Comments?

I have a Sig P210A, got it last Feb. My friend got his in March. In order to remove my barrel, I must pull a small spacer from where the spring sets. His has a different spring that is not replaceable on the rod. Which is newer/better? His photo here

Looking for a trigger job done correctly with hardening of the surfaces. I have done My P226 in the past, but after a year, the trigger is too touch. Need a smith that can harden the surfaces. I am in Queens NY or can go to Nassau county. Any recommendations please.

I have a custom mount for My Sig P210A I mounted a Burris Fastfire 3. Yes it works ok. But the glass has some distortion I don't see in my sig, or Delta point Pro re-dots. Bothers me. Too bad Armory Craft only works with just these. I have other choices I could use with this mount. Vortex...

Sig P210 or Sig P320 x5 sight roll pin I can't seem to find the roll pin for the sight assembly on the Sig P210a. I think it's the same pin used on the P320 x Five Legion. TIA

When I dump my Dillon case cleaner into the drum that separates the walnut from the brass there is dust around the area. I was told that dust contains lead and this should be done outside. I ordered a tumbler that I can carry outside easily and separate the brass outside. I have had elevated...

I just changed my load used in my sig P220 from 4.6BE 200G berrys to 4.2BE 200g Berrys. I took the factory spring out and used a Wolf 15lb spring. )the factory spring would cause a smoke stack sometimes. Groups were fine, no jams. However I feel something spitting and felt something hit me...

I called Dillon today asked them a question about a primer seating sideways. When I told them I used federal primers, they told me never ever use federal primers on a Dillon 650. I have been using federal match primers for two years in large pistol and small pistol on my to Dilllon Excel 650...

I have mounted a Delta point to my sig. P210a target using the EGW mount. I'm having a little problem with the Delta point I'm going to need to send it in for repair.. It drifts. In the meantime I have a sig. Romeo one Pro that has the same footprint as the Delta point and will fit on the...

I had a problem last year were my 200 grain rn 45 using 4.2 bull's-eye would tear the paper on the right side.. Someone said it was probably spinning. I went to 4.6 and I thought the problem was cured but it's back. I've been told that I should be running 4.0, so I just made some rounds to try...

:)Got this last week, shot fine for 200 rounds. Installed a deltapoint pro red-dot with EGW adapter. "yes, had to drill a hole in the mount" Installed and sighted in. Most of the time the slide does not stay back when mag is empty. Installed the Zahl spring set. Now slide stays back every...

I have a 1 month old 229 RX. I have about a thousand rounds through the gun. When using my berrys 124g flat nose I have intermittent jams. It's better now but still does not load the round smoothly. The same rounds work fine on my P226 and P226 legion. Never a jam. Attached is a photo that...

Could someone please post a photo of the sig P229 magazine in battery position ready before actuating the slide to load the round. TIA

Can anyone tell me how long after Carpal tunnel surgery they could hold a gund steady enough to shoot?