Search results

What do you guys keep in the pouch? Jason

So I have finished my shorty Mauser project and it loks great. I was planing to use a scout mounted 4x pistol scope. After mounting the forward mount, I just didnt like it. I think I want to go with iron sights. I have already spent too much time and money so I want to keep the price as low...

I am in the process of putting together a heavy barreled ar-15 for target shooting off the bench. I dont want to spend a ton on a scope, but I dont want to get junk either. Im looking for something that will hold zero (obviously), CLEAR, 16+ magnification ,target turrets and a 30mm tube would...

I am getting ready to submit my paperwork for a SWR trident 9 and Im wondering what would be the quietest host. Thanks jason

I have a very accurate police trade in Sig 220. Its had a hard life and looks rough, but shoots clover leaf groups and eats anything I feed it. I enjoy shooting it so muchm I figure its time to add another. My local gunshop has both the 220 Match and Super Match. Besides the obvious stuff...

Hey guys, I normally shoot 8.8 grains of Power Pistol over a 260gr cast lead hp in my Mountain gun. It clocks around 850 fps. I'm looking to load up some fairly hot Jacketed bullets for woods defence. I would probly only fire 25-30 a year. I know I cant make a magnum out of it, but it aint...

-------------------------------------------------------------------------------- My Remington 7.62x39 mini-mauser model 799 came in Friday. I mounted a scope, assemble some handloads and RAN to the range. The groups below were fired from 80 yards from the bench. It tended to like bullets...

I have a S&W 25-13 Mountain Gun. I would like to load my favorite bullet, a cast 265 gr hp over 15.4 gr of 2400. Is this a safe load in my MG (which is rated for around 25000psi) in small quantities for hunting thanks Jason

I want to turn my GSG-5 pistol into an SBR. I am filling out the ATF Form 1 for the manufacture of an SBR and have a question about 4a. since I will be turning it into an SBR do I need to list myself and German sport guns as the manufaturer? Thanks Jason

-------------------------------------------------------------------------------- I picked up an FN FiveseveN pistol this weekend at the gunshow. I was wondering if you guys could share some reloading data with me using 40 grain bullets. Being a cheap-o I dont like to buy powder for just one...

Can anyone tell me how to get the dang magazine plug out. The manual says "to increase capacity simply remove the plug from the magazine tube" :rolleyes: not much help. Thanks

I shot my first organized game of Sporting Clays a few weeks ago and I'm seriously hooked. I used my 1960's Browning A-5 which worked well but beat me up pretty bad (and I prefer not to shoot thousands of rounds through this gun which was an heirloom) so I'm looking for a suitable gun. Here is...

I shot my first round of Sporting Clays this weekend and I'm hooked. I have only shot Skeet once, and informal clays a dozen or so times. Shot a 58 out of 100 with a gun I have never wingshot with and had an absolute ball. I had the most trouble with quartering in shots. I want to get better and...

I was cleaning my A5 today and noticed that I have been shooting skeet loads with the friction ring set for magnum shells. I fired about 140 rounds today without one failure. If I change the ring to the light load setting will I have more or less felt recoil. If it works in the magnum load...

I'm looking for a rifle to replace my not-so-old Remington 700 sps stainless. Several reasons...I want a little more accuracy, the long barrel is hard to handle in the woods and stand, and I want to swithc to .308. I'm getting 1 to 1.5 inch groups now and would prefer sub moa groups if im gong...

I picked up a Guide Gun this weekend with an XS ghost ring sight. The front brass bead is missing off the front post. Anyone know where I can find a ivory, gold, brass or (best) tritium round bead sight for my 1895 Marlin. NOt interestede in post style front sights. Thanks

My local gun dealer has a Smith 53 on consignment. I have to say Im pretty interested in the .22 jet caliber. I understand that it can be plagued with problems, not the least of which is the odd .222 diameter bullets. Has anyone found a way around this? Any way to cram a .224 diameter bullets...

Am friend of mine has a Colt 1917 that his dad left him. It is missing the firing pin bushing. He really wants to fire it but we cant find he part anywhere. Numerich dosnt have it, we have scoured the internet and gunshows with no luck, we have even tried finding a rusted up junker to scavenge...

I have been kicking this idea around for years now, and I finaly have the disposable cash and a competent gunsmith to make it happen. I want to make my own custom caliber. I would like to take a 10mm and neck it down to .30 caliber and use 110 grain 30 carbine bullets and/or 30-to-22 Accelerator...

I'm really trying to talk myself out of the casting route. Are there any sources for relativly inexpensive .311-.310 projectiles. I was about to order 1000 of the Berry's plated bullets, but noticed the warning to keep the velocity below 1600fps. Thanks Jason __________________