The Timney Glock trigger is a popular aftermarket upgrade known for its crisp, lighter pull. However, like any modification, it can occasionally present problems. This guide delves into common Timney Glock trigger issues, providing troubleshooting steps and potential solutions to help you get the most out of your upgrade. We'll cover everything from installation difficulties to performance problems, ensuring you can confidently diagnose and resolve any challenges.
Common Timney Glock Trigger Problems
While generally reliable, Timney Glock triggers can sometimes experience the following issues:
1. Installation Difficulties:
-
Difficulty fitting the trigger bar: The most common installation problem stems from the trigger bar not seating correctly. This often involves carefully aligning the trigger bar with the sear and connector. Improper installation can lead to malfunctions or trigger failure. Thoroughly review the Timney instructions and consider watching detailed installation videos before beginning.
-
Pre-travel adjustment issues: Getting the pre-travel adjustment right is crucial. Too much pre-travel results in a mushy feel, while too little can cause the trigger to feel gritty or snag. This requires patience and careful adjustment using the provided tools.
2. Performance Problems:
-
Light primer strikes: A common complaint is light primer strikes, often caused by inadequate trigger bar engagement or an improper trigger pull. This could also indicate issues with the firing pin spring. Check the firing pin spring for wear and ensure that the trigger bar is correctly engaged.
-
Trigger creep: While a lighter trigger is the aim, excessive creep (a gradual increase in resistance before the break) can impact accuracy and shot consistency. This often requires adjustments to the pre-travel or over-travel.
-
Trigger reset issues: The trigger might not reset properly after firing, requiring extra force or resulting in a double-action-like feel for the next shot. Check for any interference with the trigger bar or sear engagement.
-
Over-travel issues: Excessive over-travel can make the trigger feel sloppy and unpredictable. Adjusting the over-travel screw is usually the solution. Be cautious not to over-tighten, as it could damage the trigger mechanism.
-
Inconsistent trigger pull: Variations in trigger pull weight can be problematic. This might stem from incorrect installation, dirt or debris, or wear in the trigger mechanism. Thoroughly clean and inspect the trigger assembly.
Troubleshooting Steps
Here's a step-by-step approach to troubleshooting common Timney Glock trigger problems:
-
Re-inspect the installation: Carefully review the Timney Glock trigger installation instructions. Double-check every step, ensuring all components are correctly aligned and secured. Consider watching reputable online installation videos for visual guidance.
-
Clean the trigger assembly: Dirt, grease, or debris can impede the trigger's function. Use a quality gun cleaning solvent and a soft brush to thoroughly clean all parts of the trigger mechanism. Ensure everything is completely dry before reassembly.
-
Adjust the pre-travel and over-travel: Use the provided adjustment tools to carefully fine-tune the pre-travel and over-travel. Make small adjustments, testing the trigger pull after each change.
-
Check the firing pin spring: Ensure the firing pin spring is properly installed and shows no signs of wear or damage. A weakened spring can lead to light primer strikes.
-
Seek professional help: If you've exhausted the above steps and the problems persist, consider consulting a qualified gunsmith experienced with Glock modifications and Timney triggers. They possess the expertise to diagnose and repair complex issues.
Prevention is Key
Regular cleaning and lubrication are crucial in maintaining the smooth operation of your Timney Glock trigger. Preventative maintenance can significantly reduce the likelihood of encountering problems. Always handle and store your firearm responsibly.
Disclaimer: This information is for educational purposes only. Always consult a qualified gunsmith before modifying any firearm. Improper modifications can result in malfunctions, injury, or damage to your firearm. The author and publisher assume no responsibility for any injuries or damages arising from the application of this information.
