The Remington 700 bolt is renowned for its robust design and reliable performance. However, regular cleaning and maintenance are crucial for preserving its accuracy and longevity. This guide will walk you through the process of safely disassembling and reassembling your Remington 700 bolt. Always prioritize safety: Ensure the firearm is unloaded and pointed in a safe direction before beginning any disassembly.
Tools You'll Need:
- A soft cloth or lint-free rag: To prevent scratching the bolt's finish.
- A small punch (or similar tool): For removing the firing pin retaining pin.
- A small screwdriver (if necessary): Some models may require a screwdriver to remove the bolt handle.
- Gun cleaning solvent and lubricant: For cleaning and lubricating the bolt components.
Step-by-Step Disassembly:
1. Remove the Bolt Handle:
The first step involves removing the bolt handle. This is typically accomplished by using a small punch or a suitable tool to carefully drive out the retaining pin. The exact method varies slightly depending on the specific Remington 700 model. Consult your owner's manual for detailed instructions specific to your rifle. Note: Some newer models may require the use of a screwdriver to remove the bolt handle.
2. Remove the Firing Pin Retaining Pin:
Once the bolt handle is removed, locate the firing pin retaining pin. This small pin secures the firing pin in place. Use a small punch to carefully drive out the retaining pin, ensuring the pin is caught and not lost. Again, refer to your owner's manual for precise pin location.
3. Remove the Firing Pin:
With the retaining pin removed, the firing pin should slide out. Gently push it out from the rear of the bolt body. Clean the firing pin thoroughly with a suitable solvent.
4. Remove the Extractor:
The extractor is usually held in place by a spring and pin. The method for removing the extractor varies slightly depending on the model. Consult your owner's manual for specific instructions. Be sure to note the order of assembly; taking a photo before you disassemble this helps.
5. Remove the Ejector (If Necessary):
Some Remington 700 models require removal of the ejector. This usually involves removing a small pin or screw; once again, your owner's manual will detail this process accurately for your firearm.
6. Clean and Inspect:
Once all components are disassembled, clean each part thoroughly with a gun cleaning solvent. Inspect all parts for wear and tear. Replace any damaged or worn components.
Reassembly:
Reassembly is essentially the reverse of the disassembly process. Ensure all parts are clean and properly lubricated. Pay close attention to the correct orientation of each component, and refer to your owner's manual for detailed guidance. Proper reassembly is crucial for safe and reliable function.
Important Considerations:
- Consult your owner's manual: This guide provides general instructions, but your owner's manual contains specific details for your rifle model. Always refer to your manual for accurate and safe disassembly procedures.
- Safety first: Always double-check that your firearm is unloaded before beginning any work.
- Proper lubrication: Use a high-quality gun lubricant to ensure smooth operation and prevent wear.
- Professional assistance: If you are unsure about any aspect of the disassembly or reassembly process, seek assistance from a qualified gunsmith.
By following these steps carefully, you can safely and effectively disassemble and reassemble your Remington 700 bolt, maintaining its accuracy and reliability for years to come. Remember, safety and accuracy are paramount. If in doubt, consult a professional gunsmith.
