hi-point rear sight replacement

2 min read 22-12-2024
hi-point rear sight replacement

Replacing the rear sight on your Hi-Point pistol can significantly improve your accuracy and shooting experience. While Hi-Points are known for their affordability and reliability, the factory sights often leave something to be desired. This guide provides a step-by-step walkthrough of the process, addressing common issues and offering helpful tips.

Tools and Materials You'll Need

Before starting, gather the necessary tools and materials:

  • New Hi-Point rear sight: Ensure you purchase a replacement sight compatible with your specific Hi-Point model. Different models may have slightly different sight configurations.
  • Punch (preferably a brass punch): This is crucial for safely removing the old sight. A brass punch minimizes the risk of damaging the slide.
  • Hammer: Use a hammer with a comfortable grip and appropriate weight.
  • Small flathead screwdriver (optional): Some models may require slight adjustments or prying to facilitate sight removal.
  • Gun cleaning solvent and cloth (optional): Cleaning the slide before and after the replacement is always a good practice.
  • Protective eyewear: Always wear safety glasses when working with firearms.

Step-by-Step Replacement Guide

1. Safety First:

  • Unloaded Weapon: The most important step! Ensure your Hi-Point is completely unloaded and that the magazine is removed. Visually inspect the chamber to confirm it's empty.

2. Preparing the Slide:

  • Clean the Slide (Optional): Clean the slide thoroughly with gun cleaning solvent and a cloth to remove any dirt or debris that could interfere with the sight removal or installation.

3. Removing the Old Rear Sight:

  • Locate the Sight: Identify the rear sight on your Hi-Point's slide.
  • Position the Punch: Carefully position the brass punch against the rear of the sight, aiming for the center.
  • Gently Tap the Punch: Use the hammer to gently tap the punch. Avoid using excessive force, as this could damage the slide. Apply firm, controlled taps. The sight should begin to move.
  • Persistent Resistance: If the sight is proving difficult to remove, try slightly repositioning the punch or using a small flathead screwdriver to carefully pry it loose. Be cautious not to scratch the slide.

4. Installing the New Rear Sight:

  • Alignment: Align the new rear sight with the existing dovetail on the slide. Ensure it's properly seated.
  • Gentle Tapping: Use the hammer and punch (or a sight pusher tool, if you have one) to gently tap the new sight into place. Work in small, controlled increments. You should feel it firmly seat into the dovetail.

5. Verification and Testing:

  • Sight Alignment: Check the alignment of the new sight, ensuring it is straight and properly centered.
  • Function Test: Load the firearm (after fully confirming the procedure was completed correctly) and function-test it to ensure the new sight doesn't interfere with operation.

6. Post-Replacement Cleaning (Optional):

  • Clean the Slide: Clean the slide again to remove any residual debris or fingerprints.

Troubleshooting and Common Issues

  • Sight Won't Move: Excessive force may damage the slide. If the sight is stuck, try using a penetrating oil or lubricant to loosen it. If the issue persists, seek assistance from a qualified gunsmith.
  • Sight Won't Seat Properly: Ensure the new sight is correctly aligned and seated in the dovetail. If it's loose or misaligned, it might need further adjustment or replacement.

Choosing the Right Replacement Sight

The market offers various aftermarket rear sights for Hi-Point pistols, offering enhancements in terms of material, design, and visibility. Research options suitable for your needs and shooting style.

This guide aims to help you successfully replace your Hi-Point rear sight. Remember, safety is paramount! If you’re uncomfortable with any step, consult a qualified gunsmith. Improper handling of firearms can lead to serious injury.

Site Recommendations


Related Posts


close