The Franklin Armory AK binary trigger is a popular choice among firearms enthusiasts, offering a unique shooting experience. However, like any complex piece of machinery, it can sometimes present problems. This guide dives deep into common issues, troubleshooting steps, and potential solutions to help you get the most out of your Franklin Armory AK binary trigger.
Common Problems with Franklin Armory AK Binary Triggers
While generally reliable, several issues can arise with Franklin Armory AK binary triggers. These often stem from improper installation, wear and tear, or ammunition inconsistencies. Let's examine some of the most frequently reported problems:
1. Failure to Cycle Properly:
This is arguably the most common complaint. The trigger may not fully reset, leading to a failure to fire on the subsequent shot. This can manifest as:
- Light primer strikes: The firing pin doesn't hit the primer with sufficient force.
- Complete failure to fire: The gun simply doesn't fire at all.
- Double feeds or jams: Improper cycling can lead to ammunition malfunctions.
Possible Causes:
- Improper installation: Incorrect installation is a primary culprit. Ensure you followed the manufacturer's instructions meticulously.
- Dirty or damaged trigger components: Accumulated debris or wear can impede the trigger's smooth operation.
- Weak springs: Over time, springs can weaken, affecting the trigger's function.
- Ammunition issues: Using substandard or improperly lubricated ammunition can contribute to cycling problems.
2. Trigger Creep or Inconsistent Pull Weight:
Some users report inconsistent trigger pull weight or a noticeable "creep" before the break. This can affect accuracy and shooting comfort.
Possible Causes:
- Improper adjustment: The trigger's adjustment screws might be misaligned.
- Wear and tear: Normal use can wear down trigger components, leading to inconsistent performance.
- Lubrication issues: Incorrect or insufficient lubrication can also impact trigger feel.
3. Accidental Discharge:
While rare, accidental discharges have been reported. This is a serious safety concern and necessitates immediate attention.
Possible Causes:
- Improper installation: Again, incorrect assembly is a major risk factor.
- Damaged or worn trigger components: Significant wear can compromise safety mechanisms.
- Foreign objects: Debris interfering with the trigger mechanism.
Troubleshooting and Solutions
Addressing these problems requires a systematic approach. Remember, always prioritize safety. If you're not comfortable working on firearms, consult a qualified gunsmith.
Step-by-Step Troubleshooting:
- Inspect the Trigger: Thoroughly examine the trigger assembly for any visible damage, wear, or debris. Clean all components using a suitable gun cleaning solvent and brush.
- Check Installation: Carefully review the Franklin Armory installation instructions and ensure every component is correctly installed and seated. Even a small misalignment can cause significant issues.
- Lubricate the Trigger: Use a high-quality gun lubricant to lubricate all moving parts, ensuring proper lubrication but avoiding over-lubrication.
- Test with Different Ammunition: Try different brands and types of ammunition to rule out ammunition-related problems.
- Spring Inspection: Inspect the trigger springs for wear or damage. Replace them if necessary.
- Professional Assistance: If you've exhausted all troubleshooting options and the problem persists, seek help from a qualified gunsmith.
Prevention and Maintenance
Regular maintenance is crucial for preventing problems. Clean and lubricate your trigger regularly, following the manufacturer's recommendations. Avoid using excessive force when operating the trigger. Store your firearm properly in a dry environment to prevent corrosion and rust.
Disclaimer:
This information is for educational purposes only. Always consult the manufacturer's instructions and exercise extreme caution when working on firearms. Incorrect handling or modification can lead to injury or death. This information does not constitute professional advice, and any actions taken based on this information are solely at your own risk.
