Is your Burris Veracity riflescope's elevation knob refusing to reset to zero? This frustrating issue can significantly impact your shooting accuracy and overall hunting or target practice experience. This guide will walk you through the potential causes and effective troubleshooting steps to get your elevation knob back to its proper zeroing position.
Understanding the Burris Veracity Elevation Mechanism
Before diving into troubleshooting, it's helpful to understand the mechanics of the Burris Veracity elevation system. The Veracity is known for its precision and robust build, but even high-quality equipment can malfunction. The elevation knob interacts with internal components, including gears and springs, to accurately adjust the scope's point of impact. Any obstruction, wear, or damage within this system can prevent proper resetting.
Common Causes of a Non-Resetting Elevation Knob
Several factors can contribute to a Burris Veracity elevation knob that won't return to zero:
1. Debris or Foreign Material:
Dust, dirt, or other small particles can accumulate within the elevation mechanism, jamming the gears and preventing smooth operation. This is a common issue, especially in challenging environmental conditions.
2. Worn or Damaged Internal Components:
Over time, repeated adjustments can lead to wear and tear on the internal gears and springs. This wear can cause binding, making it difficult or impossible to reset the knob.
3. Manufacturing Defect:
While rare, a manufacturing defect could be the culprit. This is less likely if the scope has been in use for some time before the problem arose.
4. Incorrect Knob Adjustment:
Sometimes, the problem isn't a mechanical malfunction but rather an incorrect adjustment technique. Ensuring you are turning the knob correctly and not forcing it is crucial.
Troubleshooting Steps:
Here's a systematic approach to troubleshooting a non-resetting elevation knob on your Burris Veracity:
1. Cleaning the Elevation Knob and Mechanism:
- Remove the scope from your rifle. This allows for easier access and prevents accidental damage.
- Carefully inspect the elevation knob. Look for any visible debris.
- Use compressed air to gently blow away any dust or particles around the knob and any visible access points to the internal mechanism. Avoid using excessive force.
- Consider using a small, soft-bristled brush to remove stubborn dirt. Never use harsh chemicals or solvents.
Caution: Avoid disassembling the scope unless you have the necessary tools and expertise. Doing so can void your warranty and potentially cause further damage.
2. Check for Binding or Obstructions:
With the scope still removed, carefully attempt to rotate the elevation knob. If you feel any binding or resistance, this indicates a potential mechanical issue that may require professional attention.
3. Verify Correct Adjustment Technique:
Make sure you’re turning the knob in the correct direction for resetting. Refer to your Burris Veracity’s instruction manual for precise instructions. Avoid forcing the knob.
4. Contact Burris Customer Service:
If the above steps fail to resolve the problem, contact Burris Customer Service. They can provide expert guidance, determine if the issue is covered under warranty, and offer repair or replacement options. They are well-versed in handling such issues and are a valuable resource.
Prevention Tips:
- Regularly clean your riflescope to prevent debris build-up.
- Avoid dropping or impacting your scope.
- Store your scope in a clean, dry environment when not in use.
By following these steps, you can effectively troubleshoot a non-resetting elevation knob on your Burris Veracity riflescope and restore its accuracy. Remember to always prioritize safety and seek professional help if needed.
